Adjusting The Picture Quality - Sony ZRD-1 Operating Instructions Manual

Caution
The items in the [Common Input Settings] screen cannot
be configured when an input channel other than HDMI is
selected in [Input Select].
Adjusting the Picture
Quality
Adjust the contrast, brightness, and other picture quality
settings.
The settings configured on the primary controller will be
applied to all the other display controllers, including the
sub controllers. Sub controllers cannot be configured
individually.
Caution
If the a primary controller is not configured via Display
Control Software or the primary controller is not already
turned on at the time the [Picture Settings] screen is
displayed, picture quality adjustment cannot be performed.
In addition, the picture quality settings will not be applied
to the sub controllers if they are not turned on.
1
Select [Picture Settings] in the [Array] menu on the
main screen of Display Control Software.
2
Configure each setting.
The values currently configured on the primary
controller are displayed on the [Picture Settings]
screen.
The settings are reflected in the picture immediately
after they are configured.
Before version 1.20.0
Version 1.20.0 or later
[Picture Mode] (version 1.20.0 or later only):
Select from [Mode1] to [Mode10] to display the
12