Table of Contents
Advertisement
78 GETTING TO KNOW YOUR VEHICLE
5. The tether strap must be hooked onto the pivot bracket
prior to removal of soft top from vehicle (both sides).
Step Five
6. Remove the soft top bow assembly pivot bracket bolts
(two per side) from the sport bar using a 10.0 mm
wrench or socket driver.
7. Lift the soft top in a upward motion to release the pivot
bracket from the sport bar bracket.
Step Seven
8. Remove the soft top from the vehicle and store in a
clean, dry location (another person may be needed to
help with this operation).
NOTE: If you are doing this alone, use one arm to hold the
bundle up, the other to remove the brackets.
Advertisement
Table of Contents
