Table of Contents
Advertisement
386 SERVICING AND MAINTENANCE
Installing The Front Wipers
1. Lift the wiper arm off of the glass, until the wiper arm is
in the full up position.
2. Position the wiper blade near the hook on the tip of the
wiper arm.
3. Insert the hook on the tip of the arm through the
opening in the wiper blade.
4. Slide the wiper blade up into the hook on the wiper arm,
latch engagement will be accompanied by an audible
click.
5. Gently lower the wiper blade onto the glass.
Rear Wiper Blade Removal/Installation
1. Remove the rear wiper arm pivot cap To access the
wiper arm nut.
Rear Wiper Assembly
1 — Wiper Arm Pivot Cap
2 — Wiper Arm
3 — Wiper Blade
2. To remove the wiper blade from the wiper arm, grasp
the wiper blade nearest to wiper arm with your right
hand. With your left hand hold the wiper arm as you
pull the wiper blade away from the wiper arm past its
stop far enough to unsnap the wiper blade pivot pin
from the receptacle on the end of the wiper arm.
NOTE: Resistance will be accompanied by an audible
snap.
Advertisement
Table of Contents
