Table of Contents
Advertisement
188 GETTING TO KNOW YOUR INSTRUMENT PANEL
Compass Variance Map
To Change The Compass Variance:
1. Turn the ignition switch RUN (it is not necessary to start
the engine).
2. Push the MENU button until Personal Settings
(Customer-Programmable Features) displays in the in-
strument cluster display.
3. Push the down arrow button until "Compass Variance"
message and the last variance zone number displays in
the instrument cluster display.
4. Push and release the right arrow button until the proper
variance zone is selected according to the map.
5. Push and release the COMPASS button to exit.
Digital Speedometer
Shows the actual vehicle speed in mph or km/h.
Average Fuel Economy
Shows the average fuel economy since the last reset.
Average fuel economy can be reset by pushing and holding
the right arrow button (as prompted in the instrument
cluster display). Upon reset, the history information will be
erased, and the averaging will continue from the last fuel
average reading before the reset.
Distance To Empty (DTE)
Shows the estimated distance that can be traveled with the
fuel remaining in the tank. This estimated distance is
determined by a weighted average of the instantaneous
and average fuel economy, according to the current fuel
tank level. DTE cannot be reset.
NOTE: Significant changes in driving style or vehicle
loading will greatly affect the actual drivable distance of
the vehicle, regardless of the DTE display value.
Advertisement
Table of Contents
