Yellow Indicator Lights; Green Indicator Lights - Jeep Wrangler JK 2018 Owner's Manual

18 wrangler user manual
Table of Contents

Advertisement

properly. Always check the TPMS malfunction telltale after
replacing one or more tires or wheels on your vehicle to
ensure that the replacement or alternate tires and wheels
allow the TPMS to continue to function properly.
CAUTION!
The TPMS has been optimized for the original equip-
ment tires and wheels. TPMS pressures and warning
have been established for the tire size equipped on
your vehicle. Undesirable system operation or sensor
damage may result when using replacement equip-
ment that is not of the same size, type, and/or style.
Aftermarket wheels can cause sensor damage. Using
aftermarket tire sealants may cause the Tire Pressure
Monitoring System (TPMS) sensor to become inoper-
able. After using an aftermarket tire sealant it is
recommended that you take your vehicle to your au-
thorized dealer to have your sensor function checked.

Yellow Indicator Lights

— Front Axle Lock Indicator Light — If Equipped
Indicates when the front axle lock has been activated.
GETTING TO KNOW YOUR INSTRUMENT PANEL 199
— Rear Axle Lock Indicator Light — If Equipped
This light indicates when the rear axle lock has been
activated.
— Rear Fog Indicator — If Equipped
This indicator light will illuminate when the rear fog lights
are on.
— 4WD Indicator Light — If Equipped
This light alerts the driver that the vehicle is in the
four-wheel drive mode, and the front and rear driveshafts
are mechanically locked together forcing the front and rear
wheels to rotate at the same speed.
— Sway Bar Indicator Light — If Equipped
This indicator light will illuminate when the front sway bar
is disconnected.

Green Indicator Lights

— Front Fog Indicator Light — If Equipped
This indicator light will illuminate when the front fog
lights are on.
4

Advertisement

Table of Contents
loading

Table of Contents