Connection Via Wps (Pin Mode) - Canon EOS Rebel T6i Instruction Manual

Connection via WPS (PIN Mode)

This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
Even if there are multiple access points active in the surrounding

area, a relatively reliable connection can be established using this
shared identification number.
It may take approx. one minute to establish a connection.

114
Select [Wi-Fi function].
1
Under the [51] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select [m].
2
Select [m] (Upload to Web service)

and press <0>.
Select a Web service.
3
Select a Web service to connect to,

then press <0>.
The contents and ordering of the list

of items displayed will vary depending
on settings.
The Web service to connect to can be

changed later (p.126).

The camera's <k> lamp will blink.

When the [Send to] screen (p.125) is
displayed, select a destination and go
to step 4.