Reconnecting - Canon EOS Rebel T6i Instruction Manual

Reconnecting

The camera can reconnect to a Web service for which connection settings have
been registered. The connection to the access point only has to be established
once. You do not need to establish a new connection for each Web service.
When settings for multiple connection destinations are registered,

select [Choose set.], select the connection destination, then
connect to the destination.
126
Select [Wi-Fi function].
1
Under the [51] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select [m].
2
Select [m] (Upload to Web service)

and press <0>.
Select a Web service.
3
Select a Web service and press

<0>.
 When the [Send to] screen (p.125) is
displayed, select a destination and go
to step 4.
Establish a connection.
4
Select [Connect] and press <0>.

On the confirmation dialog, select

[OK].

The camera will reconnect to the Web
service.