Canon EOS Rebel T6i Instruction Manual page 112

Connection via WPS (PBC Mode)
112
Select a Web service.
3
Select a Web service to connect to,

then press <0>.
The contents and ordering of the list

of items displayed will vary depending
on settings.
The Web service to connect to can be

changed later (p.126).
 The camera's <k> lamp will blink.

When the [Send to] screen (p.125) is
displayed, select a destination and go
to step 4.
Select [WPS (PBC mode)].
4
Press the <W> <X> keys to select

[WPS (PBC mode)], then press
<0>.
Select [OK] and press <0> to go to

the next screen.
Connect to the access point.
5
Press the access point's WPS button.

For details about where the button is
located and how long to press it, refer
to the access point's instruction
manual.
Select [OK] and press <0> to

establish a connection with the
access point.

When a connection with the access
point is established, the next screen
is displayed.