Troubleshooting Guide - Canon EOS Rebel T6i Instruction Manual

Troubleshooting Guide

If a problem occurs with the camera, first refer to this Troubleshooting
Guide. If this Troubleshooting Guide does not resolve the problem,
contact your dealer or nearest Canon Service Center.
A device connected with a cable cannot be used.
Set [51: Wi-Fi/NFC] to [Disable]. When it is set to [Enable], you

cannot use the camera by connecting it to a Connect Station,
computer, printer, GPS receiver, TV set, or other device with a
cable (p.18).
[Wi-Fi/NFC] cannot be set to [Enable].
[51: Wi-Fi/NFC] cannot be set to [Enable] if the camera is

connected to a Connect Station, computer, printer, GPS receiver,
TV set, or other device with a cable (p.18).
Operations such as shooting and playback are not
possible.
Operations such as shooting and playback are not possible during

a wireless LAN connection. Terminate the connection, then
perform the operation.
Cannot reconnect to a smartphone.
Even with a combination of the same camera and smartphone, if

you have changed the settings or selected a different setting,
reconnection may not be established even after selecting the same
SSID. In such a case, delete the camera connection settings from
the Wi-Fi settings on the smartphone and set up a connection
again.
If Camera Connect is left running while setting up a connection

again, the connection may not be established. In such a case,
restart Camera Connect.
153