Page 1 EOS 750D (W) Camera Wi-Fi/NFC Function Basic Instruction Manual This manual is the Basic Instruction Manual. For more detailed instructions, refer to the Instruction Manual included in the EOS Camera Instruction Manuals Disk DVD-ROM. ENGLISH...
Page 3 EOS 750D (W) Camera Basic Instruction Manual The Camera Basic Instruction Manual covers the most basic operations.
Page 4: Introduction
Introduction The EOS 750D is a digital single-lens reflex camera featuring a fine- detail CMOS sensor with approx. 24.2 effective megapixels, DIGIC 6, high-precision and high-speed 19-point AF (cross-type AF point: max. 19 points), approx. 5.0 fps continuous shooting, Live View shooting, Full High-Definition (Full HD) movie shooting, and Wi-Fi/NFC function.
Page 5: Item Check List
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Battery Pack Battery Charger LP-E17 LC-E17/LC-E17E* Camera (with protective cover) (with eyecup and body cap) Wide Strap Interface Cable * Battery Charger LC-E17 or LC-E17E is provided.
Page 6: Instruction Manual And Dvd/Cd-Roms
Instruction Manual and DVD/CD-ROMs The instruction manual consists of a booklet, leaflet and PDF manuals in electronic form (provided on the DVD-ROM). The booklet is the Basic Instruction Manual. For more detailed instructions, see the Camera Instruction Manual on the DVD-ROM. Camera and Wi-Fi/NFC Function Basic Instruction Manual (This Manual)
Page 7: Compatible Cards
Compatible Cards The camera can use the following cards regardless of capacity: If the card is new or was previously formatted by another camera or computer, format the card with this camera (p.55). • SD memory cards • SDHC memory cards* •...
Page 8: Quick Start Guide
Quick Start Guide Insert the battery (p.32) To charge the battery, see page 30. Insert the card (p.33) With the card’s label facing toward the back of the camera, insert it into the card slot. Attach the lens (p.41) White index Red index Align the lens’s white or red mount index with the camera’s mount...
Page 9 Quick Start Guide Flip out the LCD monitor (p.35) When the LCD monitor displays the date/time/zone setting screens, see page 38. Focus on the subject (p.46) Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus on the subject.
Page 10: Conventions Used In This Manual
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. <W><X><Y><Z> : Indicates the <S> cross keys on the top, bottom, left, and right. <0> : Indicates the Setting button. : Indicates that each function remains active 0, 9, 7, 8 for 4 sec., 6 sec., 10 sec., or 16 sec.
Page 11: Table Of Contents
Chapters Introduction Getting Started Basic Shooting and Image Playback Setting the AF and Drive Modes Image Settings Advanced Operations Shooting with the LCD Monitor (Live View Shooting) Shooting Movies Image Playback Viewing the DVD-ROM Instruction Manuals / Downloading Images to Your Computer...
Page 12: Contents
Contents Introduction Item Check List................. 5 Instruction Manual and DVD/CD-ROMs ........... 6 Compatible Cards................7 Quick Start Guide ................8 Conventions Used in this Manual........... 10 Chapters..................11 Contents ..................12 Safety Precautions ................. 16 Handling Precautions ..............19 Nomenclature ................. 22 Getting Started Charging the Battery ..............
Page 13 Contents Basic Shooting and Image Playback A Fully Automatic Shooting (Scene Intelligent Auto) ....62 A Full Auto Techniques (Scene Intelligent Auto)......65 7 Disabling Flash ................. 67 C Creative Auto Shooting.............68 2 Shooting Portraits ..............72 3 Shooting Landscapes ............... 73 4 Shooting Close-ups..............74 5 Shooting Moving Subjects ............
Page 14 Contents Image Settings Setting the Image-Recording Quality ........... 102 g: Changing the ISO Speed to Suit the Light ......104 A Selecting a Picture Style ............105 B: Matching the Light Source (White balance) ......106 Auto Correction of Brightness and Contrast (Auto Lighting Optimizer)..107 Setting Noise Reduction...............
Page 15 Contents Shooting Movies k Shooting Movies ..............136 Autoexposure Shooting ..............136 Manual Exposure Shooting ............137 Setting the Movie Recording Size..........140 Image Playback x Searching for Images Quickly ..........144 u/y Magnified View ..............145 d Playing Back with the Touch Screen.........146 k Playing Back Movies...............148 L Erasing Images ................
Page 16: Safety Precautions
Make sure to thoroughly understand and follow these precautions before using the product. If you experience any malfunctions, problems, or damage to the product, contact the nearest Canon Service Center or the dealer from whom you purchased the product. Follow the warnings below. Otherwise, death or Warnings serious injuries may result.
Page 17 Safety Precautions Do not fire the flash near a person’s eyes. It may impair the person’s vision. When using flash to photograph an infant, keep at least 1 meter/3.3 feet away. When the camera or accessories are not in use, make sure to remove the battery and disconnect the power plug from the equipment before storing.
Page 18 Safety Precautions Follow the cautions below. Otherwise, physical Cautions injury or property damage may result. Do not use or store the product inside a car under the hot sun or near a heat source. The product may become hot and cause skin burns. Doing so may also cause battery leakage or explosion, which will degrade the performance or shorten the life of the product.
Page 19: Handling Precautions
The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Page 20: Lcd Monitor
If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your nearest Canon Service Center or check the camera yourself and make sure it is working properly.
Page 21 Besides dust entering the camera from outside, in rare cases lubricant from the camera’s internal parts may adhere to the front of the sensor. If visible spots remain on the image, having the sensor cleaned by a Canon Service Center is recommended.
Page 22: Nomenclature
Nomenclature Built-in flash/AF-assist beam EF Lens mount index (p.41) (p.122/92) Flash sync contacts Mode Dial (p.26) Hot shoe AF area EF-S Lens mount index (p.41) selection button (p.94) <D> Flash button (p.122) Power switch (p.36) <g> ISO speed <V> Focal plane mark setting button (p.104) (p.74) <6>...
Page 23 Nomenclature <A> Live View shooting/ <g> Aperture/Exposure Movie shooting button (p.124/136) compensation button Dioptric adjustment knob (p.45) <Q> Quick Control button (p.47) Viewfinder eyepiece <A/I> AE lock/ FE lock button/Index/ Eyecup Reduce button (p.121/144, 145) Info button (p.57, 86, 126, 139) <S/u>...
Page 24 Nomenclature Shooting Function Settings (in Creative Zone modes, p.26) Shutter speed Aperture c Main Dial pointer Exposure level indicator Exposure compensation Auto Lighting Optimizer (p.107) amount (p.119) AEB range (p.120) ISO speed (p.104) Shooting mode Highlight tone priority Picture Style (p.105) y Flash exposure compensation...
Page 25: Viewfinder Information
Nomenclature Viewfinder Information Spot metering circle (p.118) Zone AF (Manual selection of zone) (p.93) Single-point AF (Manual selection) (p.93) 19-point automatic selection AF (p.93) Focusing screen AF point (p.93) Grid (p.58) Area AF frame Aspect ratio line (p.93) Flicker detection <g>...
Page 26 Nomenclature Mode Dial The Mode Dial consists of two functionally categorized zones: one for the Creative Zone modes and one for the Basic Zone modes. Creative Zone These modes give you more control for shooting various subjects as desired. d : Program AE (p.114) s : Shutter-priority AE (p.115) f : Aperture-priority AE (p.116) a : Manual exposure (p.117)
Page 27 Nomenclature Lens without a Distance Scale Focusing ring (p.97, 132) Focus mode switch (p.41) Hood mount (p.43) Zoom position index (p.42) Filter thread (front of lens) Zoom ring (p. Image Stabilizer switch (p.44) Contacts (p.21) Lens mount index (p.41)
Page 28 Nomenclature Battery Charger LC-E17 Charger for Battery Pack LP-E17 (p.30). Power plug Charge lamp Full-charge lamp Battery pack slot IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
Page 29: Getting Started
Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Attaching the Provided Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration.
Page 30: Charging The Battery
Charging the Battery Remove the protective cover. Detach the protective cover provided with the battery. Attach the battery. As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E17 Recharge the battery.
Page 31 5 sec. Do not charge any battery other than a Battery Pack LP-E17. Battery Pack LP-E17 is dedicated to Canon products only. Using it with an incompatible battery charger or product may result in malfunction or accidents for which Canon cannot be held liable.
Page 32: Installing And Removing The Battery
Installing and Removing the Battery Load a fully charged Battery Pack LP-E17 into the camera. The camera’s viewfinder becomes bright when a battery is installed, and darkens when the battery is removed. Installing the Battery Open the cover. Slide the lever as shown by the arrows and open the cover.
Page 33: Installing And Removing The Card
Installing and Removing the Card The card (sold separately) can be an SD, SDHC, or SDXC memory card. SDHC and SDXC memory cards with UHS-I can also be used. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing and erasing.
Page 34: Card Slot
Installing and Removing the Card Removing the Card Open the cover. Set the power switch to <2>. Make sure the access lamp is off, then open the cover. If [Recording...] is displayed, close the cover. Access lamp Remove the card. Gently push in the card, then let go to eject it.
Page 35: Using The Lcd Monitor
Using the LCD Monitor After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, and play back images and movies. You can change the direction and angle of the LCD monitor. Flip out the LCD monitor. Rotate the LCD monitor.
Page 36: Turning On The Power
Turning on the Power If you turn on the power switch and the date/time/zone setting screen appears, see page 38 to set the date/time/zone. <k> : The camera turns on. You can shoot movies (p.136). <1> : The camera turns on. You can shoot still photos.
Page 37: Checking The Battery Level
Turning on the Power z Checking the Battery Level When the power is turned on, the battery level will be indicated in one of the four levels. z : Battery level is sufficient. x : Battery level is low, but the camera can still be used.
Page 38: Setting The Date, Time, And Zone
Setting the Date, Time, and Zone When you turn on the power for the first time or if the date/time/zone are reset, the date/time/zone setting screen will appear. Follow the steps below, making sure to set the time zone first. Set the camera to the time zone in which you currently live so that, when you travel, you can simply change the setting to the correct time zone for your destination, and the camera will automatically adjust the date/time.
Page 39: Set The Date And Time
3 Setting the Date, Time, and Zone Set the date and time. Press the <Y> <Z> keys to select the number. Press <0> so <a> is displayed. Press the <W> <X> keys to set the number, then press <0>. (Returns to .) Set the daylight saving time.
Page 40: Selecting The Interface Language
Selecting the Interface Language Display the menu screen. Press the <M> button to display the menu screen. Under the [52] tab, select [LanguageK]. Press the <Y> <Z> keys to select the [52] tab. Press the <W> <X> keys to select [Language ], then press <0>.
Page 41: Attaching And Detaching A Lens
Attaching and Detaching a Lens The camera is compatible with all Canon EF and EF-S lenses. The camera cannot be used with EF-M lenses. Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
Page 42: Detaching The Lens
Attaching and Detaching a Lens Zooming Turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow.
Page 43 Attaching and Detaching a Lens Attaching a Lens Hood A lens hood can block unwanted light and prevent rain, snow, dust, etc. adhering to the front of the lens. When storing the lens in a bag, etc., you can also attach the hood in reverse. If there is no index mark on the lens and hood: Attach the lens hood.
Page 44: Lens Image Stabilizer
Lens Image Stabilizer When you use the IS lens’s built-in Image Stabilizer, camera shake is corrected to obtain a sharper shot. The procedure explained here is based on the EF-S18-55mm f/3.5-5.6 IS STM lens as an example. * IS stands for Image Stabilizer. Set the IS switch to <1>.
Page 45: Basic Operation
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the AF points in the viewfinder look the sharpest. If the camera dioptric adjustment still cannot provide a sharp viewfinder image, using E-series Dioptric Adjustment Lenses (sold separately) is recommended.
Page 46: Shutter Button
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder (0).
Page 47: Q Quick Control For Shooting Functions
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor. This is called Quick Control. Press the <Q> button The Quick Control screen will appear. Set the desired functions. Press the <S> cross keys to select a function.
Page 48 Q Quick Control for Shooting Functions Sample Quick Control Screen Aperture (p.116) Shutter speed (p.115) Shooting mode (p.26) Highlight tone priority* Exposure ISO speed (p.104) compensation/ AEB setting Flash exposure (p.119/120) compensation Picture Style (p.105) Built-in flash settings AF operation (p.90) (p.102) Return White balance (p.106)
Page 49: Menu Operations
Menu Operations You can set various settings with the menus such as the image- recording quality, date and time, etc. <M> button <0> button <S> cross keys LCD monitor Menu Screen The menu tabs and items displayed will differ depending on the shooting mode.
Page 50 3 Menu Operations Menu Setting Procedure Display the menu screen. Press the <M> button to display the menu screen. Select a tab. Press the <Y> <Z> keys of the cross keys to select a tab (group of functions). For example, in this manual, “the [z3] tab”...
Page 51 3 Menu Operations In step 2, you can also turn the <6> dial to select a menu tab. In steps 2 to 5, you can also use the LCD monitor’s touch screen (p.52). The explanation of menu functions hereinafter assumes that you have pressed the <M>...
Page 52: Using The Touch Screen
d Using the Touch Screen The LCD monitor is a touch-sensitive panel that you can operate with your fingers. Quick Control (Sample display) Use your finger to tap on (touch briefly and then remove your finger from) the LCD monitor. By tapping, you can select menus, icons, etc., displayed on the LCD monitor.
Page 53 d Using the Touch Screen Drag Menu screen (Sample display) Slide your finger while touching the LCD monitor. Scale display (Sample display) Operations possible by dragging your finger on the screen Selecting a menu tab or item after pressing the <M> button Setting a scale control Quick Control Setting functions during Live View shooting...
Page 54 d Using the Touch Screen 3 Touch Control Settings Select [Touch control]. Under the [53] tab, select [Touch control], then press <0>. Set the touch control setting. Select the preferred setting, then press <0>. [Standard] is the normal setting. [Sensitive] provides a more reactive touch response than [Standard].
Page 55: Formatting The Card
Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
Page 56 3 Formatting the Card Execute [Format card] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed. Low-level Formatting Perform low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase data on the card.
Page 57: Switching The Lcd Monitor Display
Switching the LCD Monitor Display The LCD monitor can display the shooting settings screen, menu screen, captured images, etc. Shooting Settings When you turn on the power, the shooting settings will be displayed. When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on.
Page 58: Ldisplaying The Grid
lDisplaying the Grid You can display a grid in the viewfinder to help you check the camera tilt or compose the shot. Select [Viewfinder display]. Under the [52] tab, select [Viewfinder display], then press <0>. Select [Grid display]. Select [Grid display], then press <0>.
Page 59: Feature Guide
Feature Guide The Feature guide appears when you change the shooting mode or set a shooting function, Live View shooting, movie shooting, or Quick Control for playback, and displays a brief description of that mode, function or option. It also displays a description when you select a function or option on the Quick Control screen.
Page 61: Basic Shooting And Image Playback
Basic Shooting and Image Playback This chapter explains how to use the Basic Zone modes on the Mode Dial for best results and how to play back images. With Basic Zone modes, all you do is point and shoot while the camera sets everything automatically (p.85).
Page 62: A Fully Automatic Shooting (Scene Intelligent Auto)
A Fully Automatic Shooting (Scene Intelligent Auto) <A> is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It also adjusts focus automatically by detecting whether the subject is still or moving (p.65). Set the Mode Dial to <A>. Aim the Area AF frame over the Area AF frame subject.
Page 63: Take The Picture
A Fully Automatic Shooting (Scene Intelligent Auto) Take the picture. Press the shutter button completely to take the picture. The captured image will be displayed for 2 sec. on the LCD monitor. After you finish shooting, push down the built-in flash with your fingers. The <A>...
Page 64 A Fully Automatic Shooting (Scene Intelligent Auto) The beeper continues to beep softly. (The focus indicator <o> does not light up.) It indicates that the camera is focusing continuously on a moving subject. (The focus indicator <o> does not light up.) You can take sharp pictures of a moving subject.
Page 65: A Full Auto Techniques (Scene Intelligent Auto)
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the <A> mode, pressing the shutter button halfway to focus on a still subject will lock the focus on that subject.
Page 66: A Live View Shooting
A Full Auto Techniques (Scene Intelligent Auto) A Live View Shooting You can shoot while viewing the image on the LCD monitor. This is called “Live View shooting”. For details, see page 123. Display the Live View image on the LCD monitor. Press the <A>...
Page 67: Disabling Flash
7 Disabling Flash The camera analyzes the scene and sets the optimum settings automatically. In places where flash photography is prohibited such as in a museum or an aquarium, use the <7> (Flash Off) mode. Shooting Tips Prevent camera shake if the numeric display in the viewfinder blinks.
Page 68: C Creative Auto Shooting
C Creative Auto Shooting In the <C> mode, you can set the following functions for shooting: (1) Extra Effect Shot, (2) Ambience-based shots, (3) Background blur, (4) Drive mode, and (5) Flash firing. The default settings are the same as the <A> mode. * CA stands for Creative Auto.
Page 69 C Creative Auto Shooting Shutter speed Aperture ISO speed If you set (1), (2) or (3) when the camera is set for Live View shooting, you can see the effect on the screen before you start shooting. (1) Extra Effect Shot •...
Page 70 C Creative Auto Shooting (2) Ambience-based shots • You can select and shoot with the ambience you want to convey in your images. • Press the <W> <X> keys to select the ambience. (3) Background blur • If [OFF] is set, the degree of background blur will change depending on the brightness.
Page 71 C Creative Auto Shooting (4) Drive mode: Use the <6> dial to make the selection. Single shooting: Shoot one image at a time. Continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approx.
Page 72: Shooting Portraits
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look.
Page 73: Shooting Landscapes
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end.
Page 74: Shooting Close-Ups
4 Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes small objects such as flowers stand out better.
Page 75: Shooting Moving Subjects
5 Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips Use a telephoto lens. The use of a telephoto lens is recommended for shooting from a distance.
Page 76: 8: Special Scene Mode
8: Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. Set the Mode Dial to <8>. Press the <Q> button The Quick Control screen will appear. Select a shooting mode. Press the <S>...
Page 77: C Shooting Children
C Shooting Children When you want to continuously focus and shoot children running around, use <C> (Kids). Skin tones will look healthy. Shooting Tips Track the subject with the Area AF frame. Aim the center AF point over the subject, then press the shutter button halfway to start autofocusing in Area AF frame.
Page 78: P Shooting Food
P Shooting Food When shooting food, use (Food). The photo will look bright and vivid. Shooting Tips Change the color tone. You can change [Color tone]. Food photos with a reddish tinge usually make the food look more vivid. To increase the food’s reddish tinge, set it toward [Warm tone].
Page 79: Shooting Candlelight Portraits
x Shooting Candlelight Portraits When shooting a human subject in candlelight, use <x> (Candlelight). The candlelight color tones will be retained in the photo. Shooting Tips Use the center AF point to focus. Aim the center AF point in the viewfinder over the subject, then shoot. Prevent camera shake if the shutter speed in the viewfinder blinks.
Page 80: Shooting Night Portraits (With A Tripod)
6 Shooting Night Portraits (With a Tripod) To shoot people at night and obtain a natural-looking night scene in the background, use the <6> (Night Portrait) mode. Using a tripod is recommended. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view.
Page 81: F Shooting Night Scenes (Handheld)
F Shooting Night Scenes (Handheld) Using a tripod when shooting a night scene gives the best results. However, the <F> (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. Four shots are taken continuously for each picture, and the resulting one image with reduced camera shake is recorded.
Page 82: G Shooting Backlit Scenes
G Shooting Backlit Scenes When shooting a scene having both bright and dark areas, use the <G> (HDR Backlight Control) mode. When you take one picture in this mode, three continuous shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting.
Page 83 Cautions for both <6> (Night Portrait) and <F> (Handheld Night Scene) During Live View shooting, it may be difficult to focus on dots of light such as in a night scene. In such a case, set the lens’s focus mode switch to <MF>...
Page 84: Q Quick Control
Q Quick Control Cautions for <G> (HDR Backlight Control) Note that the image may not be rendered with a smooth gradation and may look irregular or have significant noise. HDR Backlight Control may not be effective for excessively backlit scenes or extremely high-contrast scenes. When shooting subjects that are sufficiently bright, for example for normally lit scenes, the image may look unnatural because of the applied HDR effect.
Page 85 Q Quick Control Settable Functions in Basic Zone Modes : Default setting k: User selectable : Not selectable Function u: Single shooting i: Continuous shooting B: Silent single shooting Drive mode M: Silent continuous shooting (p.98) Q (10 sec.) l (2 sec.) q (Continuous) a: Automatic firing Flash firing...
Page 86: Image Playback
x Image Playback The easiest way to play back images is explained below. Play back the image. Press the <x> button. The last image captured or played back will appear. Select an image. To play back images starting with the last image captured, press the <Y>...
Page 87: Shooting Information Display
x Image Playback Exit the image playback. Press the <x> button to exit the image playback and return to shooting-ready state. Shooting Information Display With the shooting information screen displayed (p.86), you can press the <W> <X> keys to change the shooting information displayed at the screen’s bottom as follows.
Page 89: Setting The Af And Drive Modes
Setting the AF and Drive Modes The 19 AF points in the viewfinder make AF shooting suitable for a wide variety of subjects and scenes. You can also select the AF operation and drive mode that best match the shooting conditions and subject. The J icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (p.26).
Page 90: F: Changing The Autofocus Operation
f: Changing the Autofocus OperationK You can select the AF (autofocus) operation characteristics suiting the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. Set the lens’s focus mode switch to <AF>.
Page 91: Ai Servo Af For Moving Subjects
f: Changing the Autofocus OperationK One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point that achieved focus will be displayed, and the focus indicator <o>...
Page 92 f: Changing the Autofocus OperationK AF Points Lighting Up in Red By default, the AF points light up in red when focus is achieved in low- light conditions. In Creative Zone modes, you can set whether to have the AF points light up in red when focus is achieved. AF-Assist Beam with the Built-in Flash Under low-light conditions, when you press the shutter button halfway, the built-in flash may fire a brief burst of flashes.
Page 93: S Selecting The Af Area And Af Point
S Selecting the AF Area and AF PointK 19 AF points are provided for autofocusing. You can select the AF area selection mode and AF point(s) suiting the scene or subject. AF Area Selection Mode You can select one of three AF area selection modes. See the next page for the selection procedure.
Page 94 S Selecting the AF Area and AF PointK Selecting the AF Area Selection Mode Press the <S> or button Look through the viewfinder and press the <S> or button. Press the button. Each time you press the button, the AF area selection mode changes.
Page 95 S Selecting the AF Area and AF PointK Selecting the AF Point Manually You can manually select the AF point or zone. If 19-point automatic selection AF + AI Servo AF has been set, you can select any position where AI Servo AF is to start. Press the <S>...
Page 96: Af Area Selection Modes
AF Area Selection ModesK Single-point AF (Manual Selection) Select one AF point <S> to be used for focusing. Zone AF (Manual Selection of Zone) The 19 AF points are divided into five zones for focusing. All the AF points in the selected zone are used for the automatic selection of the focusing point(s).
Page 97: Mf: Manual Focus
MF: Manual Focus Set the lens focus mode switch to <MF>. Focus on the subject. Focus by turning the lens focusing ring until the subject looks sharp in the viewfinder. Focusing ring...
Page 98: Selecting The Drive Mode
i Selecting the Drive Mode Single and continuous drive modes are provided. Press the <YQi> button. [Drive mode] will appear. Select the drive mode. Press the <Y> <Z> keys to select the desired drive mode, then press <0>. u : Single shooting When you press the shutter button completely, only one shot will be taken.
Page 99: Using The Self-Timer
j Using the Self-timer Press the <YQi> button. [Drive mode] will appear. Select the self-timer. Press the <Y> <Z> keys to select the self-timer, then press <0>. Q: 10-sec. self-timer The remote controller can also be used. l: 2-sec. self-timer (p.71) q: 10-sec.
Page 101: Image Settings
Image Settings This chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, noise reduction, lens aberration correction, anti-flicker shooting, and other functions. The J icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (p.26).
Page 102: Setting The Image-Recording Quality
Setting the Image-Recording Quality You can select the pixel count and the image quality. Ten image- recording quality settings are provided: 73, 83, 74, 84, 7a, 8a, b, c, 1+73, 1. Select the image-recording quality. Under the [z1] tab, select [Image quality], then press <0>.
Page 103 7 (8) * The file size, possible shots, and maximum burst during continuous shooting are based on Canon’s testing standards (3:2 aspect ratio, ISO 100 and Standard Picture Style) using an 8 GB card. These figures will vary by the subject, card brand, aspect ratio, ISO speed, Picture Style, Custom Functions, and other settings.
Page 104: G: Changing The Iso Speed To Suit The Light
g: Changing the ISO Speed to Suit the LightK Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically. Press the <g> button Set the ISO speed. While looking in the viewfinder or at the LCD monitor, press the <Y>...
Page 105: A Selecting A Picture Style
A Selecting a Picture StyleK By selecting a Picture Style, you can obtain image characteristics matching your photographic expression or the subject. In Basic Zone modes, [D] (Auto) is set automatically. Press the <XA> button. The Picture Style selection screen will appear.
Page 106: B: Matching The Light Source (White Balance)
B: Matching the Light SourceK The function adjusting the color tone so that white objects look white in the picture is called white balance (WB). Normally, the [Q] (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with [Q], you can select the white balance to match the light source or set it manually by shooting a white object.
Page 107: Auto Correction Of Brightness And Contrast (Auto Lighting Optimizer)
Auto Correction of Brightness and ContrastK If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured. In Basic Zone modes, [Standard] is set automatically.
Page 108: Setting Noise Reduction
Setting Noise ReductionK High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. At low ISO speeds, the noise in the darker parts of the image (shadow areas) is further reduced.
Page 109 3 Setting Noise ReductionK Long Exposure Noise Reduction Noise reduction is possible with images exposed for 1 sec. or longer. Select [Long exp. noise reduction]. Under the [z3] tab, select [Long exp. noise reduction], then press <0>. Set the desired setting. Select the desired setting, then press <0>.
Page 110: Correction Of Lens Peripheral Illumination And Aberrations
Correction of Lens Peripheral Illumination and Aberrations Peripheral light fall-off is a phenomenon that makes the image corners look darker due to the lens characteristics. Color fringing along subject outlines is called chromatic aberration. And image distortion due to lens characteristics is called distortion.
Page 111: Distortion Correction
3 Correction of Lens Peripheral Illumination and Aberrations Take the picture. The image will be recorded with the chromatic aberration corrected. Distortion Correction Select the setting. Check that [Correction data available] is displayed for the attached lens. Select [Distortion], then press <0>. Select [Enable], then press <0>.
Page 112: Reducing Flicker
Reducing FlickerK If you shoot an image with a fast shutter speed under a light source such as fluorescent light, the blinking of the light source causes flicker and the image may be vertically unevenly exposed. If continuous shooting is used under these conditions, uneven exposures or colors across the images may result.
Page 113: Advanced Operations
Advanced Operations In Creative Zone modes, you can change various settings of the camera as you desire to obtain a wide variety of shooting results, by selecting the shutter speed and/or aperture, adjusting the exposure as you prefer, etc. The J icon at the upper right of the page title indicates that the function is available only in Creative Zone modes.
Page 114: D: Program Ae
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * <d> stands for Program. * AE stands for Auto Exposure. Set the Mode Dial to <d>. Focus on the subject. Look through the viewfinder and aim the AF point over the subject.
Page 115: S: Conveying The Subject's Movement (Shutter Priority Ae)
s: Conveying the Subject’s Movement You can either freeze the action or create motion blur with the <s> (Shutter-priority AE) mode on the Mode Dial. * <s> stands for Time value. Blurred motion Frozen action (Slow shutter speed: 1/30 sec.) (Fast shutter speed: 1/2000 sec.) Set the Mode Dial to <s>.
Page 116: F: Changing The Depth Of Field (Aperture Priority Ae)
f: Changing the Depth of Field To blur the background or to make everything near and far look sharp, set the Mode Dial to <f> (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * <f> stands for Aperture value, which is the size of the diaphragm hole inside the lens. Blurred background Sharp foreground and background (With a low aperture f/number: f/5.6)
Page 117: A: Manual Exposure
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. While referring to the exposure level indicator in the viewfinder, you can set the exposure as desired. This method is called manual exposure. * <a> stands for Manual. Set the Mode Dial to <a>.
Page 118: Changing The Metering Mode (Metering Mode)
q Changing the Metering ModeK Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, metering mode is set automatically. Select [Metering mode]. Under the [z2] tab, select [Metering mode], then press <0>. Set the metering mode.
Page 119: Setting Exposure Compensation (Exposure Comp.)
Setting Exposure CompensationK Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in Creative Zone modes (except <a>). You can set the exposure compensation up to ±5 stops in 1/3-stop increments. Check the exposure level indicator.
Page 120: Auto Exposure Bracketing (Aeb)
Auto Exposure BracketingK This feature takes exposure compensation a step further by varying the exposure automatically (up to ±2 stops in 1/3-stop increments) with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Darker exposure Brighter exposure Standard exposure...
Page 121: A Locking The Exposure (Ae Lock)
A Locking the ExposureK You can lock the exposure when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <A> button to lock the exposure, then recompose and take the picture.
Page 122: D Using The Built-In Flash
D Using the Built-in Flash In indoor, low light, or backlit conditions in daylight, just raise the built-in flash and press the shutter button to take flash pictures. In the <d> mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake.
Page 123: Shooting With The Lcd Monitor (Live View Shooting)
Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the picture on the camera’s LCD monitor. This is called “Live View shooting”. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended.
Page 124: A Shooting With The Lcd Monitor
A Shooting with the LCD Monitor Display the Live View image. Press the <A> button. The Live View image will appear on the LCD monitor. In the <A> mode, the scene icon for the scene detected by the camera is displayed on the upper left.
Page 125: Enabling Live View Shooting
A Shooting with the LCD Monitor Enabling Live View Shooting Set [A: Live View shoot.] to [Enable]. Number of Possible Shots with Live View Shooting Room Temperature Low Temperatures Temperature (23°C / 73°F) (0°C / 32°F) No Flash Approx. 200 shots Approx.
Page 126: Information Display
A Shooting with the LCD Monitor Information Display Each time you press the button, the information display will change. AF point (FlexiZone - Single) Battery check Histogram display Maximum burst* Possible shots Auto Lighting Optimizer Shooting mode Quick Control AF method White balance/ White balance...
Page 127: Using Af To Focus (Af Method)
Using AF to Focus (AF Method) Selecting the AF Method You can select an AF method to suit the shooting conditions and your subject. The following AF methods are provided: [u(face)+Tracking], [FlexiZone - Multi] (p.128), and [FlexiZone - Single] (p.130). If you want to achieve precise focus, set the lens focus mode switch to <MF>, magnify the image, and focus manually (p.132).
Page 128 Using AF to Focus (AF Method) You can also tap on the LCD monitor screen to select the face or subject. If the subject is not a face, <z> will be displayed. If no faces can be detected, or if you tap on the LCD monitor but do not select any face or subject, the camera will switch to [FlexiZone - Multi] with...
Page 129 Using AF to Focus (AF Method) Select the AF point.J Pressing <0> or the <L> button will toggle between automatic selection and zone selection. In Basic Zone modes, automatic selection is set automatically. Use the <S> cross keys to select a zone.
Page 130 Using AF to Focus (AF Method) FlexiZone - Single: d The camera focuses with a single AF point. This is effective when you want to focus on a particular subject. Display the Live View image. Press the <A> button. The Live View image will appear on the LCD monitor.
Page 131: Shooting With The Touch Shutter
x Shooting with the Touch Shutter Just by tapping on the LCD monitor screen, you can focus and take the picture automatically. This works in all shooting modes. Display the Live View image. Press the <A> button. The Live View image will appear on the LCD monitor.
Page 132: Mf: Focusing Manually
MF: Focusing Manually You can magnify the image and focus precisely with manual focus. Set the lens focus mode switch to <MF>. Turn the lens focusing ring to focus roughly. Display the magnifying frame. Press the button. The magnifying frame will appear. You can also tap [s] on the screen to magnify the image.
Page 133 MF: Focusing Manually Focus manually. While looking at the magnified image, turn the lens focusing ring to focus. After achieving focus, press the button to return to the normal view. Take the picture. Check the focus and exposure, then press the shutter button to take the picture (p.124).
Page 135: Shooting Movies
Shooting Movies Movie shooting is enabled by setting the power switch to <k>. The movie recording format will be MP4. For cards that can record movies, see page 7. If you handhold the camera and shoot movies, camera shake can cause blurred movies. Using a tripod is recommended.
Page 136: Shooting Movies
k Shooting Movies Connecting the camera to a TV set is recommended to play back the movies shot. Autoexposure Shooting When the shooting mode is set to any mode other than <a>, autoexposure control will take effect to suit the scene’s current brightness. Set the power switch to <k>.
Page 137: Manual Exposure Shooting
k Shooting Movies Manual Exposure Shooting In the <a> mode, you can freely set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. Set the power switch to <k>. The reflex mirror will make a sound, then the image will appear on the LCD monitor.
Page 138 k Shooting Movies Focus and shoot the movie. The procedure is the same as steps 3 and 4 for “Autoexposure Shooting” (p.136).
Page 139 k Shooting Movies Information Display Each time you press the button, the information display will change. AF method • c : u+Tracking • o : FlexiZone - Multi • d : FlexiZone - Single Movie shooting mode Possible shots y : Autoexposure (Basic Zone Movie shooting remaining time* / Elapsed time...
Page 140: Setting The Movie Recording Size
Setting the Movie Recording Size With [Z2: Movie rec. size], you can set the movie recording size (image size, frame rate, and compression method) and other functions. Image Size L 1920x1080 Full High-Definition (Full HD) recording quality. The aspect ratio is 16:9.
Page 141 3 Setting the Movie Recording Size Total Movie Recording Time and File Size Per Minute (Approx.) Total Recording Time on Card Movie Recording Size File Size 4 GB 8 GB 16 GB Standard 17 min. 35 min. 1 hr. 10 min. 216 MB/min. [1920x 1080] Light...
Page 143: Image Playback
Image Playback This chapter explains basic procedures to play back images and movies. Images shot and saved with another device The camera may not be able to properly display images captured with a different camera, edited with a computer, or that have had their file names changed.
Page 144: Searching For Images Quickly
x Searching for Images Quickly H Displaying Multiple Images on One Screen (Index Display) Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen. Play back the image. When you press the <x> button, the last image captured will be displayed.
Page 145: U/Y Magnified View
u/y Magnified View You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. Magnify the image. Press the button during image playback. The image will be magnified. If you hold down the button, the image will be magnified until it reaches the maximum magnification.
Page 146: Playing Back With The Touch Screen
d Playing Back with the Touch Screen The LCD monitor is a touch-sensitive panel that you can touch with your fingers for various playback operations. First, press the <x> button to play back images. Browsing Images Swipe with one finger. With single-image display, touch the LCD monitor with one finger.
Page 147 d Playing Back with the Touch Screen Reducing Image (Index Display) Pinch two fingers. Touch the screen with two fingers spread apart, and pinch your fingers together on the screen. Each time you pinch your fingers, the single-image display will change to the index display.
Page 148: Playing Back Movies
k Playing Back Movies Play back the image. Press the <x> button to display an image. Select a movie. Press the <Y> <Z> keys to select the movie to be played back. In the single-image display, the <s1> icon displayed on the upper left of the screen indicates a movie.
Page 149 k Playing Back Movies Movie Playback Panel Operation Playback Description 7 Play Pressing <0> toggles between play and stop. Adjust the slow motion speed by pressing the <Y> <Z> 8 Slow motion keys. The slow motion speed is indicated on the upper right of the screen.
Page 150: L Erasing Images
L Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.
Page 151: Viewing The Dvd-Rom Instruction Manuals
Viewing the DVD-ROM Instruction Manuals / Downloading Images to Your Computer This chapter explains how to view the Camera and Software Instruction Manuals (on the DVD-ROM provided) on your computer, download images from the camera to your computer, gives an overview of the software in the EOS Solution Disk (CD-ROM), and explains how to install the software on your computer.
Page 152: Viewing The Eos Camera Instruction Manuals Disk (Dvd-Rom)
Viewing the EOS Camera Instruction Manuals Disk (DVD-ROM) The EOS Camera Instruction Manuals Disk (DVD-ROM) contains the following electronic manuals (PDF). EOS Camera Instruction Manuals Disk XXX CEL-XXX XXX XXXXX XXXXX XXXXX XXXXX XXXXX Instruction Manual Explains all the camera functions and procedures, including basic content.
Page 153: Your Computer
DVD-ROM drive into which you have inserted the disk. Click on the name of the instruction manual you want to view. Select your language and operating system. The index of the Instruction Manuals is displayed. EOS 750D (W) ENGLISH INSTRUCTION MANUAL...
Page 154 Double-click on the disk icon. Double-click the START.html file. Click on the name of the instruction manual you want to view. Select your language and operating system. The index of the Instruction Manuals is displayed. EOS 750D (W) ENGLISH INSTRUCTION MANUAL Instruction Manual Adobe Reader (latest version recommended) must be installed to view the Instruction Manual files (PDF format).
Page 155: Downloading Images To A Computer
Downloading Images to a Computer You can use the EOS software to download the images in the camera to your computer. There are two ways to do this. Downloading by Connecting the Camera to the Computer Install the software (p.158) Use the provided interface cable to connect the camera to your computer.
Page 156: Downloading Images With A Card Reader
Downloading Images to a Computer Downloading Images with a Card Reader You can also use a card reader to download images to your computer. Install the software (p.158) Insert the card into the card reader. Use Digital Photo Professional to download the images.
Page 157: About The Software
About the Software EOS Solution Disk EOS Solution Disk XXX This disk contains various software for EOS cameras. CEL-XXX XXX XXXXX XXXXX XXXXX XXXXX XXXXX Windows XXX XXX Mac OS X XXX XXX Note that the software provided with previous cameras might not support still photos and movie files shot with this camera.
Page 158: Installing The Software
Installing the Software Installing the Software on Windows Compatible OS Windows 8.1 Windows 8 Windows 7 Check that the camera is not connected to your computer. Do not connect the camera to your computer before you install the software. The software will not be installed correctly. If a previous version is installed, follow the steps below to reinstall the software.
Page 159: Installing The Software On Macintosh
Installing the Software Installing the Software on Macintosh Compatible OS MAC OS X 10.8 - 10.10 Check that the camera is not connected to your computer. Do not connect the camera to your computer before you install the software. The software will not be installed correctly. If a previous version is installed, follow the steps below to reinstall the software.
Page 160 Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
Page 161 This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Page 162 For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/weee, or www.canon-europe.com/battery. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Page 163 EOS 750D (W) Wi-Fi/NFC Function Basic Instruction Manual In the Wi-Fi/NFC Function Basic Instruction Manual, basic operation procedures for easy-to-use “Connect to a smartphone”, “Transfer images between cameras”, and “Save images to Connect Station” are explained.
Page 164: What You Can Do Using The Wireless Lan Functions
(1), refer to the “Wi-Fi/NFC Function Instruction Manual” PDF file included in the DVD-ROM. CANON iMAGE GATEWAY Web services are not supported in certain countries and areas. For information on countries and areas supporting CANON iMAGE GATEWAY services, refer to the Canon website (http:// www.canon.com/cig).
Page 165 (6) m Send images to a Web service (CD-ROM) Share images with family and friends or share images using a range of Web services via CANON iMAGE GATEWAY, an online photo service for Canon users (free registration required). Easy Connection Using the NFC Function...
Page 166 United States and in other countries. All other trademarks are the property of their respective owners. Note that Canon cannot be held liable for any loss or damage from erroneous wireless LAN settings for using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
Page 167 Chapters Introduction Basic Operation and Settings Registering a Nickname W-13 Easy Connection to a Smartphone W-17 Transferring Images Between Cameras W-35 Easy Connection to Connect Station W-43...
Page 168 Contents Introduction What You Can Do Using the Wireless LAN Functions ....W-2 Conventions Used in this Manual..........W-4 Chapters..................W-5 Contents ..................W-6 Basic Operation and Settings Basic Operation and Settings............W-8 Registering a Nickname W-13 Registering a Nickname .............W-14 Easy Connection to a Smartphone W-17 Preparation.................W-18 Connecting with the NFC Function..........W-20...
Page 169: Basic Operation And Settings
Basic Operation and Settings This chapter describes the basic operation and settings necessary for using the camera’s wireless LAN functions.
Page 170 Basic Operation and Settings The basic operation for setting the camera’s wireless LAN functions is explained here. Follow the procedures below. Select [Wi-Fi/NFC]. Under the [51] tab, select [Wi-Fi/ NFC], then press <0>. Select [Enable]. Press the <Z> key to select [Enable], then press <0>.
Page 171 Basic Operation and Settings Select the Wi-Fi function to connect to. Press the <W> <X> or <Y> <Z> keys to select an item. The camera’s wireless LAN settings are set from this screen. For further connection settings, see “Easy Connection” or “Advanced Connection”.
Page 172: Auto Power Off
Basic Operation and Settings Auto Power Off If necessary, set [Auto power off] under the [52] tab to [Disable]. If the camera’s auto power off is activated during the wireless LAN connection, the connection will be terminated. Wireless LAN Connection Status Wireless LAN connection status can be checked with the camera’s <k>...
Page 173 (p.W-31). Hold the camera close to the Canon Connect Station (sold separately) to connect them easily via a wireless LAN (p.W-44). With this camera, you cannot connect to other NFC-enabled cameras or printers using the NFC function.
Page 174 Basic Operation and Settings Cable Connection Cautions When [51: Wi-Fi/NFC] is set to [Enable], connection via interface cable, stereo AV cable, or HDMI cable is disabled. Set [51: Wi-Fi/NFC] to [Disable] before connecting a cable. When the camera is connected to a computer, printer, GPS receiver, TV set, or any other device with an interface cable, settings for [Wi-Fi/NFC] cannot be changed.
Page 175: Registering A Nickname
Registering a Nickname This chapter describes how to set the camera’s nickname (for identification). W-13...
Page 176 Registering a Nickname Before setting up a connection, set the camera’s nickname (for identification). When the camera is connected to another device via a wireless LAN, the nickname will be displayed on the device. Be sure to set a nickname as otherwise you cannot go to the wireless LAN settings screen.
Page 177 Registering a Nickname Enter a nickname. For instructions on entering characters, see “Virtual Keyboard Operation” on the next page. Enter any characters between 1 to 14 characters in length. Exit the setting. When you are finished, press the <M> button. Select [OK] on the confirmation dialog and press <0>...
Page 178 Registering a Nickname Virtual Keyboard Operation Changing the entry area Press the <Q> button to toggle between the top and bottom entry areas. Moving the cursor Press the <Y> <Z> keys in the top area to move the cursor. Entering text In the bottom area, press the <W>...
Page 179: Easy Connection To A Smartphone
Easy Connection to a Smartphone Connecting the camera to a smartphone enables you to do the following: • View or manage images stored in the camera with the smartphone. • Receive images stored in the camera with the smartphone. • Operate the camera with the smartphone and take a picture.
Page 180: Preparation
Preparation Install Camera Connect on a Smartphone To communicate with a smartphone, the dedicated smartphone application Camera Connect (free of charge) is necessary. Camera Connect can be downloaded from the App Store or Google Play. Install Camera Connect on the smartphone and then perform the procedures to establish the connection.
Page 181 Preparation Connection Method When using an Android smartphone (OS version 4.0 or later), check if it is NFC-enabled. When the smartphone is NFC-enabled: See p.W-20 You can easily set up a connection using the NFC function. When the smartphone is not NFC-enabled: See p.W-23 Set up a connection in camera access point mode.
Page 182: Connecting With The Nfc Function
Connecting with the NFC Function Connect the camera and a smartphone using the NFC function. The operation flow for connecting via NFC is as follows. (1) Turn on the camera and smartphone. (2) Enable the NFC function on the camera and smartphone. (3) Touch the smartphone to the camera so that they come into contact with each other (p.W-21).
Page 183: Connecting To A Smartphone
Connecting with the NFC Function Connecting to a Smartphone Touch a smartphone to the camera. If an image is being played back on the camera, end the playback. Touch the p mark on the smartphone to that on the camera. When a message indicating the connection is displayed on the camera’s LCD monitor, communication can be established even if the smartphone is moved away from the camera.
Page 184 Connecting with the NFC Function Operate the Camera using Camera Connect. Perform further operations using Camera Connect. For the operation procedure, see page W-27. The settings for communicating with a smartphone are now complete. NFC Function Cautions When touching the smartphone to the camera, be careful not to drop the camera or smartphone.
Page 185: Using Camera Access Point Mode To Establish A Connection
Using Camera Access Point Mode to Establish a Connection Smartphones that are not NFC-enabled can be connected in camera access point mode. To establish connection, operations on the smartphone are required. For details, refer to the smartphone’s instruction manual. Operation on the Camera-1 Select [Wi-Fi function].
Page 186 Using Camera Access Point Mode to Establish a Connection Select [Easy connection]. Press the <W> <X> keys to select [Easy connection], then press <0>. Select [OK] and press <0> to go to the next screen. Operation on the Smartphone-1 Operate the smartphone and SSID (network name) connect it to the camera.
Page 187 Using Camera Access Point Mode to Establish a Connection Start Camera Connect on the smartphone. When the smartphone’s Wi-Fi settings are completed, start Camera Connect. Select the camera to connect to on the smartphone. Select and touch the camera to connect to from [Cameras] on Camera Connect to establish a connection.
Page 188: Connect To The Camera
Using Camera Access Point Mode to Establish a Connection Operation on the Camera-2 Connect to the camera. When a connection is established, the screen on the left will appear on the camera’s LCD monitor. Press the <Z> key to select [OK], then press <0>.
Page 189: Operating The Camera Using A Smartphone
Operating the Camera Using a Smartphone You can use a smartphone with Camera Connect installed to view images stored in the camera and shoot remotely. Camera Connect Main Window The main functions of Camera Connect are described below. Touch the screen to learn the operation procedures.
Page 190 Operating the Camera Using a Smartphone Terminating the Connection To terminate the connection, perform either of the following operations. Tap [t] on the Camera Connect screen. Set the camera’s power to <2>. While connected, a picture cannot be taken even if the camera’s shutter button is pressed.
Page 191: Reconnecting
Reconnecting The camera can reconnect to a smartphone for which connection settings have been registered. Select [Wi-Fi function]. Under the [51] tab, set [Wi-Fi/NFC] to [Enable], then select [Wi-Fi function]. Select [q]. Select [q] (Connect to smartphone) and press <0>. Establish a connection.
Page 192 Reconnecting Activate the smartphone’s Wi-Fi function. If the connection destination has been changed, restore the setting to connect to the camera. Start Camera Connect on the smartphone. A connection will be established. If you do not know the SSID of the camera when reconnecting, select [Review/change settings] in step 3 to check it.
Page 193: Easy Image Transfer Using The Nfc Function
Easy Image Transfer Using the NFC Function While playing back images on the camera, touch an NFC-enabled smartphone to the camera to send a captured image to the smartphone. If a connection has already been established via a wireless LAN, terminate the connection and then play back images on the camera.
Page 194 Easy Image Transfer Using the NFC Function Press <0>. Select [Send img shown]. Press the <Y> <Z> keys to select [Send img shown], then press <0>. When you select [Send selected], the screen in step 2 on page W-33 is displayed.
Page 195: Sending Multiple Images
Easy Image Transfer Using the NFC Function Sending Multiple Images When the index display is selected in step 1 on page W-31, the image selection screen will appear on the camera after a connection is established. Connect the camera to the smartphone.
Page 196 Easy Image Transfer Using the NFC Function Sending Another Image On the screen to complete the process for sending the image, press <0> to send another image. [Send selected] You can select the images to send in the image selection screen. [Send img shown] Sends the displayed image.
Page 197: Transferring Images Between Cameras
Images can be transferred between Canon cameras via the built-in wireless LAN functions. Wireless connection is possible for Canon cameras with built-in wireless LAN functions marketed in 2012 or later. Note that the camera cannot be connected to Canon camcorders, even if they have built-in wireless LAN functions.
Page 198: Selecting The Connection Destination
Selecting the Connection Destination Register the target camera to connect to via a wireless LAN. The camera can be connected to only one camera at a time. Select [Wi-Fi function]. Under the [51] tab, set [Wi-Fi/NFC] to [Enable], then select [Wi-Fi function].
Page 199 Selecting the Connection Destination Select the images to send. Select images on the camera sending the images (p.W-38). Do not operate the camera receiving the images. Note that GPS information is not displayed on the camera’s playback screen even if GPS information is appended to the received image. Shooting locations can be viewed on a virtual map, using Map Utility (EOS software).
Page 200: Sending Images
Sending Images Sending Images Individually Select and send images individually. Select an image to send. Press the <Y> <Z> keys to select an image to send, then press <0>. By pressing the button, you can switch to the index display and select an image.
Page 201 Sending Images Sending Multiple Images Select multiple images and send them at once. Press <0>. Select [Send selected]. To select a size at which to send the images, select [Resize image] and press <0>. Press the <Y> <Z> keys to select [Send selected], then press <0>.
Page 202 Sending Images Reduce the image size. Set it if necessary. On the next screen, press the <W> <X> keys to select an image size, then press <0>. Send the images. Press the <W> <X> keys to select [Send], then press <0> to send the images.
Page 203 [Resize:S2] and [Resize:S3] are enabled only for still photos shot with the EOS 750D. Images shot with other cameras are sent without resizing. The file size (total size) is based on the file sizes before resizing the images.
Page 204: Reconnecting
Reconnecting The camera can reconnect to another camera for which connection settings have been registered. Select [Wi-Fi function]. Under the [51] tab, set [Wi-Fi/NFC] to [Enable], then select [Wi-Fi function]. Select [z]. Select [z] (Transfer imgs between cameras) and press <0>. Establish a connection.
Page 205: Easy Connection To Connect Station
Easy Connection to Connect Station Connect Station (sold separately) is a device that allows you to import captured still photos and movies for viewing on your TV set, smartphone, etc., or sharing them over a network. You can easily save still photos and movies to Connect Station by holding this camera close to the Connect Station.
Page 206: Saving Images
Saving Images This section explains how to connect the camera and Connect Station (sold separately) via a wireless LAN. To save images in other ways, refer to the Connect Station instruction manual. Set up the camera to allow use of its NFC function in advance (p.W- 20).
Page 207 Saving Images Do not drop the camera on Connect Station or touch the camera to it with too much force. Doing so may damage Connect Station’s internal hard disk. Since the camera may not be recognized readily, hold it carefully close to Connect Station while changing the camera’s position or angle.
Page 208 W-46...
Page 209: Wi-Fi (Wireless Lan) Precautions
To avoid violating wireless LAN regulations, visit the Canon website to check where use is allowed. Note that Canon cannot be held liable for any problems arising from wireless LAN use in other countries and regions.
Page 210 W-48...
Page 212 CANON EUROPA N.V. PO Box 2262, 1180 EG Amstelveen, The Netherlands For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support The product and associated warranty are provided in European countries by Canon Europa N.V. The descriptions in this Instruction Manual are current as of January 2015. For information on the compatibility with any products introduced after this date, contact any Canon Service Center.

This manual is also suitable for:

Eos 750dw

Canon EOS 750D Basic Instruction Manual

Table of Contents

Introduction

Getting Started

Basic Shooting and Image Playback

Setting the AF and Drive Modes

Image Settings

Advanced Operations

Shooting with the LCD Monitor (Live View Shooting)

Shooting Movies

Image Playback

Viewing the DVD-ROM Instruction Manuals

Downloading Images to Your Computer

Table of Contents

1 Basic Operation and Settings

2 Registering a Nickname

3 Easy Connection to a Smartphone

4 Transferring Images between Cameras

5 Easy Connection to Connect Station

Quick Links

Chapters

Related Manuals for Canon EOS 750D

Summary of Contents for Canon EOS 750D