Connecting Via Wps (Pin Mode) - Canon EOS 2000D Instruction Manual

Connecting via WPS (PIN Mode)

This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
Even if there are multiple access points active in the surrounding

area, a relatively reliable connection can be established using this
shared identification number.
It may take approx. one minute to establish a connection.

Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function] (p.17).
If a screen for setting a nickname (for

identification) appears, register a
nickname (p.14).
Select an item.
2
Select [q] or [l], then press <0>.

 The camera's <k> lamp will blink.
Select [Select a network].
3
Select [Select a network] and press

<0>.
Select [OK] and press <0> to go to

the next screen.
79