(1)
(1) First few characters of the SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used
Access Point Encryption
This camera supports the following options for [Authentication] and
[Encryption settings]. Therefore, the encryption used by the access
point must be one of the following.
[Authentication]: Open system, Shared key, or WPA/WPA2-PSK
[Encryption settings]: WEP, TKIP, or AES
[Enter connection] and [Search again]
To configure settings for the access point manually, select [Enter
connection] and press <0>. Enter the SSID using the virtual
keyboard and then configure settings following the instructions
displayed.
To search for access points again, select [Search again] and press
<0>.
Select [Find network].
4
Select an access point.
5
(2) (3)
Manual Connection by Searching Networks
Press the <W> <X> keys to select
[Find network], then press <0>.
Select [OK] and press <0> to go to
the next screen.
Press <0> to enable the selection of
an access point.
Press the <W> <X> keys to select an
access point, then press <0>.
Select [OK] and press <0> to go to
the next screen (p.80).
79