Canon EOS Rebel T6i Instruction Manual page 29

Connecting to a Smartphone
When a message indicating the connection is displayed on the

camera's LCD monitor, move the smartphone away from the
camera.

The camera's <k> lamp will blink.
 Camera Connect starts on the smartphone and establishes a
connection.

When the operation on the camera is completed in step 2, the
Camera Connect Main window will appear.
The device name set
on Camera Connect
You can check or change the device name on the setting screen of Camera
Connect.
Touch a smartphone to the
1
camera.
If an image is being played back on

the camera, end the playback.
Touch the p mark on the smartphone

to that on the camera.
Save the settings.
2
When a connection is established,

the screen on the left will appear on
the camera's LCD monitor. When
connection settings are already
saved, this screen will not appear and
the LCD monitor will turn off.
To specify viewable images, press the

<B> button. See step 5 on page
90 to set them.

The camera's <k> lamp will light up
in blue.
Press the <Z> key to select [OK],

then press <0>.
 After a message is displayed, the
camera's LCD monitor will turn off.
Connecting with the NFC Function
29