Instructions For Upload From Local Directory; Instructions For Local Firmware Upgrade Using Tftp Server; Configuration File Download - Grandstream Networks HT802 User Manual

 Grandstream's latest firmware is available at
Oversea users are strongly recommended to download the binary files and upgrade firmware
locally in a controlled LAN environment.
Note: Alternatively, the user can upload the firmware single file from his/her computer using a local
directory. For more instructions see below. Also the user can download a free TFTP or HTTP server and
conduct local firmware upgrade. A free windows version TFTP server is available for download from
http://support.solarwinds.net/updates/New-customerFree.cfm.
downloaded from http://www.grandstream.com/support/firmware

INSTRUCTIONS FOR UPLOAD FROM LOCAL DIRECTORY:

1- Download the firmware file from Grandstream web site
2- Unzip it and copy the file in to a folder in your PC
3- From the HT802 web interface (Advanced Settings page) you can browse your hard drive and
select the folder you previously saved the file (HT802fw.bin)
4- Click "Upload Firmware" and wait few minutes until the new program is loaded.
Note: Always check the status page to see that the program version has changed.

INSTRUCTIONS FOR LOCAL FIRMWARE UPGRADE USING TFTP SERVER:

1. Unzip the file and put all of them under the root directory of the TFTP server.
2. Put the PC running the TFTP server and the HT802 device in the same LAN segment.
3. Please go to File -> Configure -> Security to change the TFTP server's default setting from
"Receive Only" to "Transmit Only" for the firmware upgrade.
4. Start the TFTP server, in the phone's web configuration page
5. Configure the Firmware Server Path with the IP address of the PC
6. Update the change and reboot the unit
End users can also choose to download the free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server.

CONFIGURATION FILE DOWNLOAD

Grandstream SIP Device can be configured via Web Interface as well as via Configuration File through
TFTP or HTTP/HTTPS. "Config Server Path" is the TFTP or HTTP/HTTPS server path for configuration
FIRMWARE VERSION 1.0.0.5
http://www.grandstream.com/support/firmware
Our latest official release can be
.
HT802 USER MANUAL
.
Page 40 of 46