Hardware Specification - Grandstream Networks HT802 User Manual

DHCP Server/Client
Telnet Server
Fax over Ip
QoS
Transport Protocol
DTMF Method
IP Signaling
Provisioning
Control
Device Management
Dial Plan
Caller ID
Call Handling
Features

HARDWARE SPECIFICATION

The table below lists the Hardware and Technical specification of HT802.
Telephone Interfaces
Network Interface
LED Indicators
Factory Reset Button
Universal Switching
Power Adaptor
Environmental
FIRMWARE VERSION 1.0.0.5
Yes, DHCP Client only
Yes
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax Pass-
through, Fax Datapump V.17, V.19, V.27ter, V.29 for T.38 fax relay
Diffserve, TOS, 802.1 P/Q VLAN tagging
RTP/RTCP
Flexible DTMF transmission method, user interface of In-audio, RFC2833, and/or SIP Info
SIP (RFC 3261)
TFTP, HTTP, HTTPS, TR-069, XML
TLS/SIPS , SIP over TCP/TLS
Web interface or via secure encrypted AES or non-encrypted central configuration file for
mass deployment using Grandstream binary file or xml format. Auto/manual provisioning
system or via built-in IVR.
NAT-friendly remote software upgrade (via TFTP/HTTP/HTTPS) for deployed devices
including behind firewall/NAT. Syslog support. Full support of TR-069 management protocol
and Telnet access.
Yes
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Caller ID display or block, Call waiting caller ID, Call waiting/flash, Call transfer, hold,
forward, 3-way conferencing, message waiting, Do-Not-Disturb (DND), call-return service
TABLE 4: HT802 HARDWARE AND TECHNICAL SPECIFICATIONS
2 RJ11 FXS port
1 RJ45 10/100 Mb Base-TX, Full Duplex port with connectivity LEDs
POWER, INTERNET, PHONE1, PHONE2
Yes
Input: AC 100–240 V 50/60 Hz 0.2A max
Output: DC 5V, 1A, UL, FCC certified
o o
–104
Operational: 32 F or 0
o o
–140
Storage: 14 F or -10
Humidity: 10–90% Non-condensing
HT802 USER MANUAL
o o
–40
C
o o
–60
Page 12 of 46