Table of Contents
Advertisement
3. Press the
4. Turn the selection knob until the required
language is displayed;
5. Press the
6. Press the
Energy Saving
use this function to activate or deactivate energy
saving mode. This mode is active by default,
reducing energy consumption in compliance
with current european regulations.
When energy saving mode is active, an asterisk
appears below "energy Saving" in the menu.
1. Press the P button to enter the menu;
2. Turn the selection knob until "energy Saving"
is displayed;
3. Press the
displayed, or "enable?" if the function has
already been disabled.
4. Press the
the function or
menu.
When the function is enabled, if the appliance is
not used for about 1 minute, "energy Saving" is
displayed.
Please note!
a few seconds may elapse between energy
saving mode and delivery of the first coffee.
Cup warmer
This function enables the cup warmer to be
enabled or disabled. Proceed as follows:
1. Press the P button to enter the menu;
2. Turn the selection knob until
is displayed;
3.
Press the
displayed, or "disable?" if the function has
already been enabled.
4.
Press the
the function or
menu.
Warming the cups keeps the coffee hot.
Adjust time
To adjust the time on the display, proceed as
follows:
1. Press the P button to enter the menu;
2. Turn the selection knob until
button;
button to confirm;
button to exit the menu.
button:
"disable?" is
button
to disable or enable
button
to exit the
"Cup warmer"
button;
"enable?" is
button
to enable or disable
button
to exit the
"adjust time" is
displayed;
3.
Press the
the display;
4. Turn the selection knob to change the
hours;
5. Press the
minutes flash on the display;
6. Turn the selection knob to change the
minutes;
7. Press the
8. Press the
Auto-start
you can set the auto-start time in order to
have the appliance ready at a certain time (for
example in the morning) so you can make coffee
immediately.
Please note!
To activate this function, the time must already
have been set correctly.
1. Press the P button to enter the menu;
2. Turn the selection knob until
disabled" is
displayed;
3.
Press the
displayed;
4.
Press the
the
display;
5. Turn the selection knob to change the hours;
6.
Press the
minutes flash on the
7. Turn the selection knob to change the
minutes;
8. Press the
start enabled" and the
displayed.
9. Press the
The
symbol appears next to the
clock to indicate that auto-start has been
programmed.
To disable the function:
1. Press the P button to enter the menu;
2. Turn the selection knob until
enabled"
and the symbol
3. Press the
displayed;
4. Press the
11
button:
the hours flash on
button to confirm.
button to confirm;
button to exit the menu.
"auto-start
button:
"enable?" is
button:
the hours flash on
button to confirm.
display;
button to confirm:
symbol are
button to exit the menu.
"auto-start
are displayed;
button: "deactivate?" is
button to confirm.
The
The
"auto-
Advertisement
Table of Contents
Troubleshooting
