Set Language; Energy Saving; Audible Warning; Customise Profile - DeLonghi Dinamica Plus Instructions For Use Manual

2. Select the required time interval by pressing the selection
arrows (increase) or
3. To confirm, press
Auto-off is now programmed.

6.12 Set language

To modify the language of the display, proceed as follows:
"
1. Press SET LANGUAGE";
2. Press the flag corresponding to the language you want
to set (press
available).

6.13 Energy saving

Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
Press "ENERGY SAVING" to disable (
function;
The corresponding symbol (B1) appears on the top bar of the
homepage to indicate that the function has been enabled.
Please note:
If energy saving is active, you may have to wait a few seconds
before delivery.

6.14 Audible warning

This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press "BEEP" to disable (
function;

6.15 Customise profile

To customise the icon of the current profile, proceed as follows:
1. Press "CUSTOMISE PROFILE";
2. Select the desired icon (press
the available icons).

6.16 Statistics

This displays statistics relating to the machine. To view the
statistics, proceed as follows:
Press "STATISTICS" and check all the statistics by scrolling
through the items using

6.17 Machine info

This displays the serial number of the machine. To view the
number, press "MACHINE INFO". (press
the operation).
(decrease);
.
to display all the languages
) or enable ( ) the
) or enable ( ) the
to display all
.
to cancel

6.18 Default values

This function resets all menu settings and all user customiza-
tions, restoring the factory default values (with the exception of
the language, which remains as set, and the statistics).
To reset the default values, proceed as follows:
1. Press "DEFAULT VALUES": the display shows the prompt
"RESET FACTORY DEFAULT VALUES": press
confirm (or press
2. "FACTORY DEFAULT VALUES SET": press
confirm.

7. MAKING COFFEE

7.1 Making coffee using coffee beans

Important!
Do not use green, caramelized or candied coffee beans as they
could stick to the coffee grinder and make it unusable.
1. Fill the container (A3) with coffee beans (fig. 9);
2. Place a cup under the coffee spouts (A9) (fig.8);
3. Lower the spouts as near as possible to the cup (fig. 10).
This makes a creamier coffee;
4. Select the required coffee drink:
Recipe Quantity
≃ 40 ml
ESPRESSO
≃ 180 ml from ≃100
COFFEE
≃ 160 ml from ≃115
LONG
≃ 40 ml
2X
ESPRESSO
x 2 cups
8
to cancel the operation);
8
Program- Intensity
mable predefined
quantity
from ≃20 to
≃ 180ml
to ≃240ml
to ≃250 ml
--
to
to
10 9