Table of Contents
Advertisement
The appliance ends the first start up procedure,
then the message "Turning off, Please Wait..." is
displayed and the appliance goes off.
The coffee maker is now ready for normal use.
Please note:
• When using the appliance for the first time,
you need to make 4/5 cups of coffee or 4/5
cappuccinos before the appliance starts to
give satisfactory results.
TURNING THE APPlIANCE ON
Please note:
Before turning the appliance on, make sure the
main switch on the back of the appliance is in the
i position (fig. 1).
each time the appliance is turned on, it performs
an automatic preheat and rinse cycle which
cannot be interrupted.
The appliance is ready for use only after
completion of this cycle.
Danger of burns!
during rinsing, a little hot water comes out of
the coffee spouts and is collected in the drip tray
underneath.
avoid contact with splashes of water.
• To turn the appliance on, press the
button (fig. 5). The message "heating up...
Please wait" is displayed.
after heating, the message "rinsing..." is
displayed. as well as heating the boiler, the
appliance also heats the internal circuits by
circulating hot water.
The appliance is at temperature when the
message "normal CoFFee Standard taste" is
displayed.
TURNING THE APPlIANCE OFF
each time the appliance is turned off, it performs
an automatic rinse cycle which cannot be
interrupted.
Important!
To avoid damaging the appliance, always press
the
button to turn off.
Danger of burns!
during rinsing, a little hot water is delivered from
the coffee spouts.
avoid contact with splashes of water.
To turn the appliance off, press the
(fig. 4). The appliance performs the rinse cycle
then goes off.
Please note:
if the appliance is not used for an extended
period, place the main switch in the 0 position
(fig. 6).
never place the main switch in the 0 position
while the appliance is on.
MENU SETTINGS
When you access the programming menu by pressing
the P button, the following menu items are available:
rinsing,
descale, Set language, energy Saving, Cup
Warmer, adjust time, auto-start, auto-off, Coffee
temperature, Water hardness, Statistics, default
values.
Rinsing
Con questa funzione è possibile avviare un risciacquo
"manuale" per riscaldare l'infusore e il gruppo erogatore
caffè.
1. Press the P button to enter the menu;
2. Turn the selection knob until "rinsing..." is
displayed;
3. Press the
4. The message "Confirm?" is displayed;
5. Press the
rinse function begins and "rinsing..." is
displayed;
6. after rinsing, the appliance automatically
exits the menu and is ready to make coffee.
Please note:
unlike automatic rinsing, manual rinsing can
be interrupted at any moment by pressing the
button.
Descale
For instructions on descaling, see page 17.
Setting the language
To change the language on the display, proceed
as follows:
1. Press the P button to enter the menu
programmazione;
2. Turn the selection knob until "Set language"
is displayed;
10
button
button;
button to confirm: The
Advertisement
Table of Contents
Troubleshooting
