Table of Contents
Advertisement
"Quantity" bar
-
+
-
+
-
-
+
+
-
EXTRA SHORT
-
+
+
-
-
+
-
+
-
-
+
-
+
+
-
+
-
SHORT COFFEE
+
-
+
-
-
+
-
+
+
-
+
-
+
-
+
-
-
+
-
+
+
-
+
-
+
-
+
-
-
+
-
+
+
+
-
LONG COFFEE
-
+
-
+
-
+
+
-
+
-
EXTRA LONG
+
The quantity bar fills up progressively each time you press the
selection icon.
customizing the "my coffee" quantity
The appliance is set by default to automatically deliver 30 ml
of "my coffee".
To modify these settings, proceed as follows:
1. Place a cup under the coffee spouts ( fig. 8).
2. Press the selection icon (C10) repeatedly until the
bar on the display corresponds to the "MY COFFEE"
-
+
-
3. Press the
icon (fig. 9) until "MY COFFEE Program
+
-
Quantity" and the
+
-
The appliance starts delivering coffee and the
+
flashes;
-
+
4. As soon as the coffee in the cup reaches the required level,
-
+
press the
icon again.
The quantity set has now been programmed.
regulating the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially. However, if after making
the first few coffees you find that delivery is either too fast or
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (fig. 10).
Please Note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
coffee
Quantity
selected
(fl. oz.)
MY COFFEE
Program from
≃0.68 to ≃6.1
≃ 1
COFFEE
≃ 1.35
≃ 2.35
STANDARD
COFFEE
≃ 3.04
≃ 4.06
COFFEE
symbol are displayed, then release.
These
adjustments
ter at least 2 cups of coffee have been delivered.
If delivery is still too fast or too slow, repe-
at the correction, turning the dial another click.
tips for a hotter coffee:
For a hotter coffee, you are recommended to:
•
perform a rinse cycle before delivering the coffee: press
the
icon to select the "Rinsing..." function. Hot water
is delivered from the spout, heating the internal circuits
and making the coffee delivered hotter;
•
if " Energy Saving" mode is disabled, place the cups on the
cup warmer until they are warm;
•
warm the cups by rinsing them with hot water (using the
hot water function);
•
in the menu, set coffee temperature to "high"
(llll).
preparing coffee using coffee beans
Important!
Do not use caramelized or candied coffee beans as they could
stick to the coffee mill and make it unusable.
icon
1. Fill the container with coffee beans (fig. 12).
2. Place under the coffee spouts:
- 1 cup, if you want 1 coffee (fig. 8);
- 2 cups, if you want 2 coffees;
3. Lower the spouts as near as possible to the cup. This ma-
kes a creamier coffee (fig. 13).
4. Press the icon corresponding to the number of coffees
required (1 cup
5. Preparation begins. One or two cups appear on the display
and gradually fill as preparation progresses.
Once the coffee has been made, the appliance prepares for use
again.
Please Note:
•
While the machine is making coffee, delivery can be in-
terrupted at any moment by pressing the icon selected
previously.
•
At the end of delivery, to increase the quantity of coffee
in the cup, just press (within 3 seconds) the icon selected
previously.
14
For full bodied creamier coffee, turn
one click anticlockwise towards "1"
(finer ground coffee). For faster
delivery (not a drop at a time), turn
one click clockwise towards "7" (co-
arser ground coffee).
will
only
be
evident
or 2 cups
) (fig. 9 and 14).
af-
Advertisement
Table of Contents
Troubleshooting
