Rear Terminal - Sanyo PLC-XU105 Owner's Manual

Part Names and Functions

Rear Terminal

①
SERVICE PORT
This jack is used to service the projector.
②
COMPUTER IN /COMPONENT IN
Connect the computer or component video (or
RGB Scart) output signal to this terminal.
Use the supplied VGA cable or a Component-VGA
cable (not supplied).
③
MONITOR OUT
This terminal can be used to output the incoming
RGB signal from COMPUTER IN 1 terminal or
COMPUTER IN 2/COMPONENT IN terminal to the
other monitor (pp.16, 18).
④
COMPUTER IN 1
Connect the computer output to this terminal
(p.16).
⑤
VIDEO IN
Connect the composite video output signal to this
jack (p.17).
10
① ②
⑤
③ ④
⑥ ⑦ ⑧ ⑨
⑥
AUDIO IN
Connect the audio output signal from video
equipment connected to
mono audio signal (a single audio jack), connect it
to the L (MONO) jack (p.17).
⑦
COMPUTER/COMPONENT AUDIO IN
Connect the audio output (stereo) signal from a
computer or video equipment connected to
to this jack (pp.16, 18).
⑧
AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.16–18).
This terminal outputs sound from AUDIO IN
⑥ ⑦
terminal ( or ).
⑨
S-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.17).
⑤ ⑨
or to this jack. For a
② ④
or