Turning Off The Projector - Sanyo PLC-XU105 Owner's Manual

Basic Operation

Turning Off the Projector

1 Press the POWER ON/STAND-BY button on the top
control or on the remote control, and "Power off?"
appears on the screen.
 Press the POWER ON/STAND-BY button again to turn
off the projector. The POWER indicator starts to blink
red, and the cooling fans keep running. (You can select
the level of fans' quietness and speed. See "Fan" on
page 52.) At this time, you can unplug the AC power
cord even if the fans are still running.
3 When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on
the projector.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT OPERATE THE PROJECTOR CONTINUOUSLY
WITHOUT REST. CONTINUOUS USE MAY RESULT
IN SHORTENING THE LAMP LIFE. TURN OFF THE
PROJECTOR AND LET STAND FOR ABOUT AN HOUR
IN EVERY 24 HOURS.

Notes:
• When the On start function is set to "On," the projector will
be turned on automatically by connecting the AC power
cord to an AC outlet (p.48).
• The running speed of cooling fans is changed according to
the temperature inside the projector.
• Do not put the projector in a case before the projector is
cooled enough.
• If the WARNING indicator blinks or lights red, see "Warning
Indicator" on page 54.
• While the POWER indicator is blinking, the lamp is being
cooled down and the projector cannot be turned on. Wait
until the POWER indicator stops blinking to turn on the
projector again.
• The fan rotation will terminate directly if the AC power cord
is unplugged immediately after the projector is turned off.
• The projector can be turned on after the POWER indicator
turns red. The waiting time to restart will be shortened
when the normal power-off processing for fan cooling is
completed, compared with the time the AC power cord is
immediately unplugged after the power-off.
0
"Power off?" disappears after 4 seconds.