Image Mode Selection - Sanyo PLC-XU105 Owner's Manual

Image Mode Selection

Direct Operation
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a blackboard.
This is mainly effective on a green colored board, not truly
effective on a black colored board.
Image 1–4
For viewing with the user preset image mode in the Image
Adjust Menu (pp 40–41). This Image memory is provided in
each computer, component, and video input source.
Menu Operation
1 Press the MENU button to display the On-Screen Menu.
◄►
Use the Point buttons to move the red frame pointer
to the Image Select Menu icon.
▲▼
 Use the Point buttons to move the red frame pointer
to the desired image mode and then press the SELECT
button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard(Green)
For the image projected on a blackboard. See above for
further description.
Image1–4
For viewing with the user preset image mode in the Image
Adjust Menu (pp. 40–41).
Remote Control
IMAGE
button
Image Select Menu icon
Image Select Menu
Move the red frame pointer to
the desired image mode and
press the SELECT button.
The selected image mode is check marked.
Video Input
IMAGE button
Dynamic
Standard
Cinema
Blackboard (Green)
Image 1
Image 
Image 3
Image 4
39