Shield Fence Instruction - Sony Ericsson W960 Working Instruction, Electrical

Working Instruction, Electrical

8 Shield fence instruction

This instruction shows how to cut and bend the shield can
fence to be able to replace components under the fence.
Use a sharp-edged pliers to cut the fence.
Use Shield fence pliers NTZ 112 537 to bend the fence.
M -
AKE SURE THAT CUTTING PLIERS IS SHARP EDGED TO
.
PREVENT DAMAGING THE SHIELD CAN FENCE
Remove the shield can lid, use a dentist hook.
Remove the pick up area according to the white lines with
a cutting plier. (1)
This pick up area is only used when machine mounting
and there is no need to put it back again.
Cut the shield can fence according to the white lines with
a cutting plier. (2)
Carefully bend the shield fence with a shield fence plier.
Replace the components.
Replace the components.
Bend carefully back the shield fence.
Put back a new shield can lid.
Press on all sides of the lid until you hear a "click" sound.
12(35)
1206-4806 Rev1
©
Sony Ericsson Mobile Communications AB