3
Repair Actions
Refer to the Tools Catalogue/Matrix for information about equipment required for PBA repair!
3.1
Shield Can Fence Modifications
Refer to the pictures below of the primary and secondary sides for repairs that require the Shield Can
Fence to be modified:
• the shield can lid has to be removed
• the red symbols show where the frame should be cut to enable rework
• after rework the height of the frame should not be affected
• it should not be visible that rework has been carried out when the lid has been mounted
1223-6749 Rev 7
©
Sony Ericsson Mobile Communications AB – Company Internal
Component Replacement Repair Drawing Additional Soldering Process/
Side Primary
Side Secondary
7(7)