N2662 Esd Protection For Usb; N3001 Bluetooth Module - Sony Ericsson W960 Working Instruction, Electrical

9.15 N2662
M
AKE SURE THAT CUTTING PLIERS IS SHARP
PREVENT DAMAGING THE SHIELD CAN FENCE
Remove the shield can lid, use a dentist hook.
Remove the pick up area according to the white lines with
a cutting plier.
This pick up area doesn't have to be replaced.
Replace the ESD protection for USB.
Use Hot air repair equipment.
Put back a new shield can lid.
Press on all sides of the lid until you hear a "click" sound.
9.16 N3001
Remove the shield can lid.
Use a dentist hook.
Replace the Bluetooth module.
Use BGA repair equipment.
Put back a new shield can lid.
Press on all sides of the lid until you hear a "click" sound.
1206-4806 Rev1
©
Sony Ericsson Mobile Communications AB
ESD Protection for USB
-
EDGED TO
.
Bluetooth module
Working Instruction, Electrical
21(35)