N4021, N4040 Step-Down Dc/Dc; N4030 2,8V 150Ma Line Regulator - Sony Ericsson W960 Working Instruction, Electrical

9.17 N4021, N4040
M
AKE SURE THAT CUTTING PLIERS IS SHARP
PREVENT DAMAGING THE SHIELD CAN FENCE
Remove the shield can lid, use a dentist hook.
Remove the pick up area according to the white lines with
a cutting plier.
This pick up area doesn't have to be replaced.
Replace the Step-down DC/DC Converter.
Use Hot air repair equipment.
Put back a new shield can lid.
9.18 N4030
M
AKE SURE THAT CUTTING PLIERS IS SHARP
PREVENT DAMAGING THE SHIELD CAN FENCE
Remove the shield can lid, use a dentist hook.
Remove the pick up area according to the white lines with
a cutting plier.
This pick up area doesn't have to be replaced.
Replace the 2,8V 150mA Line Regulator.
Use Hot air repair equipment.
Put back a new shield can lid.
1206-4806 Rev1
©
Sony Ericsson Mobile Communications AB
Step-down DC/DC
-
EDGED TO
.
2,8V 150mA Line regulator
-
EDGED TO
.
Working Instruction, Electrical
22(35)