Johnson Controls S1-TTSCC Instruction Manual page 41

4. Place touch screen down in a safe/dry space (away from fan blades, condensation, etc.).
Failure to ensure the Touch Screen Communicating Control is safely placed may cause damage
to the device.
5. Return power to the entire system.
6. The Touch Screen Communicating Control will commence the start up sequence (as outlined
previously).
11:07AM Thu 21 Jul
Select the desired mode of operation for this device.
Demo Service Tool
Mode
Navigating Service Mode: Service Tool
Service mode screens on the service tool are the same as described before. However, there is
some functionality of service mode that is not available on the service tool. The following outlines
what is available from the service tool.
11:07AM Thu 7/21
Touch ICON for a detailed view
Heat Pump
OFF
Refresh resh Accessories Accessories
Log Button: Service Tool
11:07AM Thu 7/21
Touch ICON for a detailed view
Heat Pump
OFF
Refresh resh Accessories Accessories
Johnson Controls Unitary Products
System Master
Mode Mode
Exit Service Mode
Thermostat
ON
Humidifier
ON
UV La UV Lamps
ON ON
EAC EAC
Not In Not Installed
Furna Furnace
ON ON
Log Log Menu
Exit Service Mode
Thermostat
ON
Humidifier
ON
UV Lamps UV La
ON ON
EAC EAC
Not Installed Not In
Furnace Furna
ON ON
Log Log Menu
7. Select the service
prompted.
The system map displayed on the service tool
has all of the information that the master dis-
plays. This includes pressing the equipment
icons and viewing: Equipment Details, Status,
and Inputs/Outputs screens.
The log button is available in service mode. The
user will not be able to enter a new log event or
clear log entries. The other functions of log are
available and are outlined in the Log Button:
Master Control section of this document.
1078329-UIM-A-0114
tool option when
41