Johnson Controls S1-TTSCC Instruction Manual page 34

1078329-UIM-A-0114
The logo must be saved on a USB drive and plugged into the Touch Screen Communicating Con-
trol as described in the "Import/Export" section of these instructions.
The logo must be saved in the appropriate format using the configuration tool.
In addition to manually entering dealer information at the thermostat, the dealer information can be
added using the configuration tool. From the "Dealer Information" screen select the "Edit" button.
Then select the "Import" button and plug the USB drive into the Touch Screen Communicating Con-
trol (as described in the "Import/Export" section of these instructions).
Maintenance Reminder
This "tool" is available in all communicating systems. This screen gives the user access to view,
edit, enable, and disable maintenance reminders.
The maintenance reminder was designed to give an installer the opportunity to display a "mainte-
nance needed pop up" to the homeowner on a specified date displaying the dealer information
entered.
This reminder could be used for seasonal system checkups or any other preventable mainte-
nance that the dealer sees fit.
Administrator Tools
This screen is used to access firmware update, firmware restart, and restore defaults.
Firmware:
The firmware button is used when there is a need to update the controller to a more recent program.
To update the firmware:
1. Load the new firmware onto a USB drive.
2. Plug the drive into the Touch Screen Communicating Control as described in the "Import/Export"
section of these instructions.
3. Press the "Firmware" button (on the Administrator tools screen).
4. The thermostat will locate the firmware file.
Flashing new firmware will restore the Touch Screen Communicating Control to defaults. To pre-
vent losing system settings: export "Installer Configuration" file before installing the new firmware.
The installer configuration file can be imported after the firmware update to return the thermostats
settings, schedule, dealer information, etc.
Do not remove the USB drive until the thermostat instructs you to do so. Failure to follow these
instructions can cause your controller to perform erratically.
34
NOTICE
NOTICE
NOTICE
Johnson Controls Unitary Products