Johnson Controls S1-TTSCC Instruction Manual page 36

1078329-UIM-A-0114
Available Setting
Indoor Fan Icon and Status
Indoor Humidity Icon and Status
Outdoor Temperature
Upgrade Firmware
Import Configuration File
Export Configuration File
Create a New Event in Log
View Details of Events in Log
Enable Security
Change Sleep Screen
Select Advanced Programmable Mode
Select Programmable Mode
Import/Export Program Schedule
Giving the homeowner the ability to "Upgrade Firmware" may require that the Touch Screen Com-
municating Control re-enter the auto-setup process. The installer should be sure that the home-
owner is capable of this task before allowing this option. If the auto-setup is not executed
properly, the system may not operate as desired.
36
If checked "Yes"
The fan icon and animation will be displayed on the touch
screen dash.
The humidity icon and animation will be displayed on the
touch screen dash.
The outdoor temperature will be displayed on the touch
screen dash.
The "homeowner" will have the ability to upgrade
firmware.
The "homeowner" will have the ability import
configuration settings.
The "homeowner" will have the ability export
configuration settings.
The "homeowner" will have the ability to create a custom
log entry.
The "homeowner" will have the ability to view fault and
event details in the log.
The "homeowner" will have the ability to set and change
pin settings to limit access to the touch screen
The "homeowner" will have the ability to select whether
the touch screen displays the sleep screen after time out.
The "homeowner" will have the ability to select
Advanced Programmable as a view mode from the
menu screen.
The "homeowner" will have the ability to select
Programmable as a view mode from the menu screen.
The "homeowner" will have the ability to import/export a
saved schedule.
Johnson Controls Unitary Products