Johnson Controls S1-TTSCC Instruction Manual page 25

Edit/Add Devices
Edit/Add devices screen is used to add accessories/upgrades to the communicating system. These
accessories/upgrades may include: heat pump, air conditioner, filters, humidifiers, UV lights, etc.
Adding equipment through this screen will allow the control to provide maintenance updates and
track any changes to the system. It will also ensure proper system functionality. Accessories must
be added using this screen to enable the functionality of the Touch Screen Communicating Control
for each accessory.
To add a device:
Follow the installation instructions provided with the equipment being installed. For wiring instruc-
tions of Humidifier, see the wiring section of this document.
Edit/Add Devices
11:07AM Thu 21 Jul
Select a device to edit/add information:
System ID = HP14
Other:
Add
Device
Furnace
Other:
Add Devices
11:07AM Thu 21 Jul
Clean Air:
Humidifier Electronic Air Cleaner
Ventilation:
Generic Ventilator Energy Recovery
Ventilator
Some of the device icons that are shown may not be used unless the communicating accessory
board has been installed.
Add Devices 11:07AM Thu 21 Jul
Please Enter Accessory
Humidifier:
Model/Serial Number
Model/Serial Number:
Model Number
Serial Number
Johnson Controls Unitary Products
NOTICE
Heat Pump
Back
Next
UV Lamp
Heat Recovery
Ventilator
Cancel
NOTICE
Cancel Done
1. Select from one of the options on the main,
edit/add devices screen (see picture).
2. Once "Add Device" is selected the possible
devices to add will be loaded for selection.
Select the icon that represents the device
being added (In this case humidifier).
3. The next screen allows the user to add a
model and serial number to the device details
for future reference. Simply press the space
that indicates "Model Number" or "Serial
Number". This will activate the keyboard for
input.
1078329-UIM-A-0114
25