Names; Symbols; Line-Editing Keys - Extreme Networks Summit 200-24 Installation And User Manual

Names

All named components of the switch configuration must have a unique name. Names must begin with
an alphabetical character and are delimited by whitespace, unless enclosed in quotation marks.

Symbols

You may see a variety of symbols shown as part of the command syntax. These symbols explain how to
enter the command, and you do not type them as part of the command itself. Table 12 summarizes
command syntax symbols.
Table 12: Command Syntax Symbols
Symbol
< > (angle brackets) Enclose a variable or value. You must specify the variable or value. For
[ ] (square brackets) Enclose a required value or list of required arguments. One or more
| (vertical bar)
{ } (braces)

Line-Editing Keys

Table 13 describes the line-editing keys available using the CLI.
Table 13: Line-Editing Keys
Keystroke
Backspace
Delete or [Ctrl] + D
[Ctrl] + K
Summit 200 Series Switch Installation and User Guide
Description
example, in the syntax
config vlan <name> ipaddress <ip_address>
you must supply a VLAN name for <name> and an address for
<ip_address> when entering the command. Do not type the angle
brackets.
values or arguments can be specified. For example, in the syntax
use image [primary | secondary]
you must specify either the primary or secondary image when entering
the command. Do not type the square brackets.
Separates mutually exclusive items in a list, one of which must be
entered. For example, in the syntax
config snmp community [read-only | read-write]
<string>
you must specify either the read or write community string in the
command. Do not type the vertical bar.
Enclose an optional value or a list of optional arguments. One or more
values or arguments can be specified. For example, in the syntax
reboot {<date> <time> | cancel}
you can specify either a particular date and time combination, or the
keyword cancel to cancel a previously scheduled reboot. If you do not
specify an argument, the command will prompt, asking if you want to
reboot the switch now. Do not type the braces.
Description
Deletes character to left of cursor and shifts remainder of line to left.
Deletes character under cursor and shifts remainder of line to left.
Deletes characters from under cursor to end of line.
Line-Editing Keys
43