Extreme Networks Summit 200-24 Installation And User Manual page 141

Table 35: show eaps Display Fields (continued)
Field
Port status:
Tag status:
Hello Timer interval:
Fail Timer interval:
Preforwarding Timer interval:
Last update: 1
EAPS Domain has ... Controller Vlans:
EAPS Domain has ... Protected Vlans:
Number of Protected Vlans:
1. These fields apply only to transit nodes; they are not displayed for a master node.
2. This list is displayed when you use the detail keyword in the show eaps command.
Summit 200 Series Switch Installation and User Guide
Description
• Unknown—This EAPS domain is not running, so
the port status has not yet been determined.
• Up—The port is up and is forwarding data.
• Down—The port is down.
• Blocked—The port is up, but data is blocked from
being forwarded.
Tagged status of the control VLAN:
• Tagged—The control VLAN has this port assigned
to it, and the port is tagged in the VLAN.
• Untagged—The control VLAN has this port
assigned to it, but the port is untagged in the
control VLAN.
• Undetermined—Either a VLAN has not been
added as the control VLAN to this EAPS domain
or this port has not been added to the control
VLAN.
The configured value of the timer.
The configured value of the timer.
1
The configured value of the timer. This value is set
internally by the EAPS software.
Displayed only for transit nodes; indicates the last
time the transit node received a hello packet from the
master node (identified by its MAC address).
Lists the assigned name and ID of the control VLAN.
2 Lists the assigned names and VLAN IDs of all the
protected VLANs configured on this EAPS domain.
The count of protected VLANs configured on this
EAPS domain.
Commands for Configuring and Monitoring EAPS
141