Extreme Networks Summit 200-24 Installation And User Manual page 61

Configuring RADIUS Client
You can define primary and secondary server communication information, and for each RADIUS server,
the RADIUS port number to use when talking to the RADIUS server. The default port value is 1645. The
client IP address is the IP address used by the RADIUS server for communicating back to the switch.
RADIUS commands are described in Table 19.
Table 19: RADIUS Commands
Command
config radius [primary | secondary] server
[<ipaddress> | <hostname>] {<udp_port>} client-ip
<ipaddress>
config radius [primary | secondary] shared-secret
{encrypted} <string>
config radius-accounting [primary | secondary]
server [<ipaddress> | <hostname>] {<udp_port>}
client-ip <ipaddress>
config radius-accounting [primary | secondary]
shared-secret {encrypted} <string>
disable radius
disable radius-accounting
Summit 200 Series Switch Installation and User Guide
Description
Configures the primary and secondary
RADIUS server. Specify the following:
• [primary | secondary] —
Configure either the primary or
secondary RADIUS server.
• [<ipaddress> | <hostname>] —
The IP address or hostname of the
server being configured.
• <udp_port> — The UDP port to use
to contact the RADIUS server. The
default UDP port setting is 1645.
• client-ip <ipaddress> — The IP
address used by the switch to identify
itself when communicating with the
RADIUS server.
The RADIUS server defined by this
command is used for user name
authentication and CLI command
authentication.
Configures the authentication string used
to communicate with the RADIUS server.
Configures the RADIUS accounting server.
Specify the following:
• [primary | secondary] —
Configure either the primary or
secondary RADIUS server.
• [<ipadress> | <hostname>] —
The IP address or hostname of the
server being configured.
• <udp_port> — The UDP port to use
to contact the RADIUS server. The
default UDP port setting is 1646.
• client-ip <ipaddress> — The IP
address used by the switch to identify
itself when communicating with the
RADIUS server.
The accounting server and the RADIUS
authentication server can be the same.
Configures the authentication string used
to communicate with the RADIUS
accounting server.
Disables the RADIUS client.
Disables RADIUS accounting.
Authenticating Users
61