Summit 300-24 Switch Leds - Extreme Networks Summit 200-24 Hardware Installation Manual

Summit 300 Switch Overview
Figure 9: Summit 300-24 switch front view
Management
LED
Fan LED
PSU LEDs

Summit 300-24 Switch LEDs

The light emitting diode (LED) behavior on the Summit 300-24 is described in Table 10.
Table 10: Summit 300-24 switch LED behavior (continued)
Unit Status LED (MGMT LED)
Color
Green, solid
Green, blinking
Amber,
blinking
Off
Fan LED
Color
Green, solid
Amber,
blinking
Off
Power Supply LEDs
PSU-I Color
Green, solid
Amber,
blinking
Off
PSU-E Color
Green, solid
Amber,
blinking
Off
50
10/100 Mbps ports
10/100/1000-baseT ports
Indicates
The Summit switch is operating normally.
The Summit switch POST is in progress.
The Summit switch has failed its POST or an overheat condition
is detected.
There is no power.
Indicates
All fans are operating normally.
One or more fans has failed. The switch continues to operate
unless over-heating occurs.
The Summit switch has no power.
Indicates
The internal power supply is operating normally.
The internal power supply has failed, or the AC connector is not
plugged-in. If the power supply has failed, replace the internal
power supply as soon as possible.
The internal power supply has no power.
Indicates
The external power supply is operating normally.
The external power supply has failed, or the AC connector is not
plugged-in.
The external power supply is not connected.
Mini-GBIC
port status LEDs
Consolidated "e" Series Hardware Installation Guide
Console
port
Mini-GBIC/
1000-baseX ports
RVN24001A