Summit 300 Optional Features; External Power Supply (45019); Caution - Extreme Networks Summit 200-24 Hardware Installation Manual

7

Summit 300 Optional Features

This chapter describes how to install optional features on the Summit 300 family of switches. You can
order the following features from your Extreme sales representative:
• External Power Supply (45019) on page 75
• Internal 600 Watt Power Supply (15412) on page 79

External Power Supply (45019)

The Extreme Networks External Power Supply 45019 (EPS-LD) provides additional power to the
Summit 300-24. The EPS-LD provides 465 W total power with 375 W dedicated for PoE applications.
When attached to the Summit 300-24, the EPS-LD acts as a redundant power supply. The wattage is
sufficient to power all ports on the Summit 300-24 model.
The external power supply box contains the following items:
• One EPS-LD unit
• Mounting hardware, including screws
• One AC power cable for use in North America.
• One EPS-LD cable for connecting the power supply to the switch.
NOTE
If you are using the EPS-LD outside North America, the input power cord must have an IEC320-C14
connector and the appropriate power input plug for the country in which you are operating. The cord
must be 10 feet or less and at least 16-gauge copper wire.

CAUTION

The Extreme EPS-LD unit must only be installed or removed by trained service personnel in accordance
with the installation instructions. Before servicing this system, please read the safety information
provided in Appendix A. Not following these precautions can result in equipment damage or shock..
Consolidated "e" Series Hardware Installation Guide 75