Table of Contents
Advertisement
Use the Machine
5.3.2 Load Non-Standard-Size Media
a
Adjust the Paper Guides 1 to fit the media width.
b
Place the sheet, face down, top edge first in the Feed Tray between the Paper Guides until you feel
the top edge touch the inside of the machine.
Note
• The machine will keep transferring the foil until the Feed Tray is empty.
If you load additional sheets during the foil transfer, the machine may not align them correctly and may not
transfer the foil onto them successfully.
• Load additional sheets only when [Ready] appears on the LCD.
• If the sheet is longer than the Extendable Feed Tray Flap, hold the sheet to make sure the machine feeds
it correctly.
1
5
26
Advertisement
Table of Contents
