Brother HAK 100 User Manual page 14

Prepare the Machine
c
Open the Front Cover.
d
Lift the lower part of the Foil Holder 1, and then lift the entire Foil Holder upwards 2 to remove it from
the machine.
e
Load the Foil Cartridge in the Foil Holder.
For more information see:
 Load the Full-Width Foil Cartridge on page 12
 Load the Half-Width Foil Cartridge on page 14
f
Load the Foil Holder and Cartridge Assembly into the machine.
g
Close the Front Cover by pushing it firmly so that it locks into place. The machine will not operate if the
Front Cover is not fully closed.
2
1
3
10