To Transfer The Foil Onto A Two-Sided Sheet; Load The Media - Brother HAK 100 User Manual

Use the Machine
c
Load the sheet into the Feed Tray (for more information, see Load the Media on page 23).
When the sheet is loaded correctly, the LCD message changes to [Media Set?].
d
Press (Start).
[Processing] appears on the LCD.
Note
When the foil transfer finishes, the LCD message changes to [Ready]. To continue transferring, return to
step 2.
e
If you have finished transferring, press
[Shutting Down] appears on the LCD, and then the machine turns off.

5.2 To Transfer the Foil onto a Two-sided Sheet

a
Use a laser printer to print the front side of the sheet.
b
Transfer the foil onto the printed content on the front side of the sheet using the machine.
c
Print the reverse side of the sheet onto which you have transferred the foil.
d
Transfer the foil onto the printed content on the reverse side of the sheet.

5.3 Load the Media

The Feed Tray can hold multiple sheets of a total thickness not exceeding 5 mm and feeds each sheet
individually. Use the 90 g/m
Tray.
Important
• Make sure the media is completely dry.
• DO NOT pull on the sheet while it is feeding.
(Power On/Off) to turn the machine off.
2 2
to 350 g/m media and always fan the sheets before placing them in the Feed
5
23