Throttle Linkage And Ignition Leads - Echo Power Pruner PPT-265ES Operator's Manual

THROTTLE LINKAGE AND IGNITION LEADS

2. Place throttle cable (A) and brass cable guide (B) through adjust-
and seat cable end into large hole in carburetor swivel (D).
5. Push clip to fully seat both ends into notch.
6. Assure both ends of clip are secured in notch as shown. Con-
(B) is pulled. Check throttle for freedom of movement and that
wide open throttle / low idle extremes are adjusted properly. The
Consult with your Echo Dealer for correct adjustment procedure.
P
OWER
O
PERATOR
E
F
P
TM
RUNER
' M
S ANUAL
C
B
A
E
F
B
13
D