Assembly; Throttle Handle Assembly; Auger Installation - Echo EA-410 Operator's Manual

Hide thumbs Also See for EA-410:

Table of Contents

ASSEMBLY

Parts Required:

Throttle Handle Assembly, Screw, Hex nut.

1. Cut and remove one (1) white plastic shipping tie that

secures handle assembly to packing materials.

Note: DO NOT cut or remove black plastic ties.

2. Remove mounting screw and hex nut from throttle handle

assembly, and slide throttle handle onto mounting bar.

3. Align hole in throttle handle assembly with hole in bar.

4. Secure throttle handle to bar with screw and hex nut.

5. Tighten securely.

Parts Required:

Auger Blade Assembly - Includes: 6 - 10 in. Earth

Auger: 3/8-16 x 1- 1/2" Bolt, 3/8-16 Hex Nut,

2 - 4 in. Earth Augers: 3/8-16 x 1- 1/4" Socket

Head Screw, 8 - 10 in. Ice Augers: 3/8-16 x

1- 1/4" Socket Head Screw

1. Carefully place engine on a flat surface with muffler side

down.

2. Remove assembly hardware from auger.

3. Slide auger assembly onto gear case PTO shaft.

4. Align PTO shaft mounting hole with auger mounting hole.

5. Secure auger to PTO shaft with hardware provided, and

tighten securely.

Note: Six, 8, & 10 in. Earth Augers hardware style shown in

illustration. Two, 3, & 4 in. Earth augers and 8 & 10 in. Ice

Augers use socket head screws only.

EA-410

X7504220703

Table of Contents