Table of Contents
Advertisement
30
S
TORAGE
WARNING
may result.
Long Term Storage (over 30 days)
Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte-
nance which includes the following:
DANGER
injury may result.
2. Place the stop switch in the "OFF" position.
from exterior of unit.
IMPORTANT
Some tree sap and resins are corrosive. Thoroughly
then coat metal parts with light oil.
4. Perform all periodic lubrication and services that are
required.
5. Tighten all the screws and nuts.
6. Drain fuel tank completely. Press purge bulb 6 -7
times to remove remaining fuel from carburetor then
engine until it stops due to lack of fuel.
7. A. Allow engine to cool then remove the spark plug
engine oil into the cylinder through the spark
plug hole.
B. Pull the recoil starter handle 2-3 times to
distribute the oil inside the engine.
C. Observe the piston location through the spark
plug hole. Pull the recoil starter handle slowly
until the piston reaches the top of its travel and
leave it there.
8.
Install the spark plug (do not connect spark plug
cable).
9.
Install the guide bar cover on the guide bar and saw
chain during storage.
Advertisement
Table of Contents
