STARTING WARM ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke.
WARNING
injury may result.
NOTE
Adjustment" instructions in this manual or see your ECHO Dealer.
1.
Stop Switch.
Move Stop Switch button (A) forward away from the STOP posi-
tion.
2.
Purge Bulb
Pump purge bulb
clear fuel tank return line. Pump bulb an additional 4 or 5 times.
3.
Recoil Starter.
with left hand. Do not depress throttle trigger. Pull the recoil
NOTE
STOPPING ENGINE
1.
Throttle.
stopping engine.
2.
Stop Switch.
Move stop switch button (A) backward to STOP position.
WARNING
If engine does not stop when stop switch is moved to STOP posi-
your ECHO dealer repair stop switch before using pruner again.
P
OWER
O
PERATOR
A
Cold Start
throttle handle
A
P
RUNER
'
M
S
ANUAL
Run
C
D
TM
19