Caller List - Panasonic KX-TGMA44AZ Operating Instructions Manual

For Caller ID Type II users
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or muted
for a short period of time. This is not a fault
of the product as these events are normal.
R The tones are generated by your phone
service provider.
For Call Waiting or Call
Waiting Caller ID service
users (for New Zealand)
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider. This feature allows you to
receive calls while you are already talking on
the phone. If you receive a call while on the
phone, you will hear a call waiting tone. If you
subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed on the
handset that is in use after you hear the call
waiting tone.
1
Press MRECALLN to answer the 2nd call.
2
To switch between calls, press
MRECALLN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Talking Caller ID
Handset / Base unit
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to a Caller ID service of your
phone service provider.
– turn this feature on (page 42).
When caller information is received, the
handsets and/or base unit announce the
caller's name or phone number received from
your phone service provider following every
ring.
Phonebook name announcement
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
R Name pronunciation may vary. This feature
may not pronounce all names correctly.
Note:
For users in name display service available
areas:
R Caller ID service has a limit of how many
characters can be displayed. If the caller's
name is too long, the unit may not be able
to display or announce the entire name.

Caller list

Important:
R Make sure the unit's date and time setting
is correct (page 21).
Viewing the caller list and
calling back
1
MCN CID
2
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
To call back, press MTALKN.
To exit, press MOFFN.
Note:
R If the entry has already been viewed or
answered, " " is displayed.
R If you do not want to dial the area code
when making calls from the caller list, you
can store the area code which you want the
unit to delete automatically (page 49).
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 49) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Caller ID Service
49