Making/Answering Calls; Making Calls; Answering Calls - Panasonic KX-TGMA44AZ Operating Instructions Manual

Making/Answering Calls

Making calls

1
Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
2
Press MTALKN to make the call.
R To make the call using the
speakerphone, press MZN.
3
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R While talking, you can switch between the
receiver and the speakerphone by pressing
MZN.
R In step 1, you can store the dialled phone
number to the phonebook by pressing
MSAVEN.
Making a call using the redial list
The last 5 phone numbers dialled are stored in
the redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN: Select the desired entry.
3
MTALKN
Erasing a number in the redial list
1
MEN REDIAL
2
MbN: Select the desired entry. a
MERASEN
3
MbN: "Yes" a MSELECTN a MOFFN
Adjusting the receiver or
speaker volume
Handset
Press MjN or MkN on the side repeatedly
while talking.
R The available settings vary by model and
whether volume booster is turned on or off
(page 24).
R Pressing the MBOOSTN key activates the
volume booster feature. Use this key with
care. To prevent hearing damage, we
30
recommend that you set this product to the
lowest volume setting at which you can
hear adequately.
Base unit
Press MjN or MkN repeatedly while talking.
Pause (for PBX/long
distance service users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 37).
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
9 a MDN (Pause)
2
Dial the phone number. a MTALKN
Note:
R A 3 second pause is inserted each time you
press MDN (Pause) on the handset.

Answering calls

Using the handset
When a call is being received, the message
indicator flashes rapidly if the handset
message indicator's "Incoming call"
setting is enabled (page 27).
1
Lift the handset and then press MTALKN
or MZN when the unit rings.
2
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key (1 to 9, *, or #).
Auto talk: You can answer calls simply by
lifting the handset (page 43).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
soft key).
Using the base unit
N (left