Table of Contents
Advertisement
TG6500C_Preparation.fm Page 32 Thursday, September 30, 2004 4:54 PM
Preparing the Answering System
Caller's Recording Time
You can select "1 minute", "2 minutes", "3 minutes" or "Greeting only" for the caller's
recording time. Each line has its own setting. The factory preset for both lines is "3
minutes".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Press the soft key (
answering".
4
Scroll to "Recording time" by pressing
[d] or [B], then press the soft key (
5
Press [d] (Line1) or [B] (Line2) to select
the line.
6
Select the recording time by pressing [d] or
[B].
• You can also select the recording time by
pressing [1], [2], [3], or [0] (Greeting only).
7
Press the soft key (
• To select the other line, repeat from step 4.
8
Press [OFF].
If you select "Greeting only" for the line(s), the unit will answer a call with the
greeting message, and then hang up. The unit will not record any incoming
messages for the line(s). When you turn the Answering System on, the base unit
will display "
" and the line(s) (
32
Handset
SELECT
) at "Set
SELECT
SELECT
).
SAVE
and/or
LINE 1
Initial setting
).
Set answering
Recording time
).
Recording time
=Line1
=Line2
B
d
Recording time
L1:3min
) for a few seconds.
LINE 2
Advertisement
Table of Contents
