Night Mode - Panasonic KX-TGMA44AZ Operating Instructions Manual

Programming
6
*: Select "AM" or "PM". a MOKN
7
Enter a text memo (10 characters max.).
a MOKN
8
MbN: Select the desired alarm tone. a
MSELECTN
R If you select one of the ringers
("Ringer 1" to "Ringer 5"), select
the desired frequency ("Frequency
1" to "Frequency 6").
R We recommend selecting a different
ringer tone from the one used for
outside calls and intercom calls.
9
MbN: Select the desired snooze setting.
a MSAVEN
10
MSELECTN a MOFFN
Note:
R Press MSTOPN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or MSNOOZEN to stop
the sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.

Night mode

Night mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for each unit.
Using the phonebook's group feature
(page 36), you can also select groups of
callers whose calls override night mode and
ring the unit (Caller ID subscribers only).
Important:
R Make sure the unit's date and time setting
is correct (page 21).
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
46
Turning night mode on/off
1
For handset: MMENUN#238
For base unit (using a handset):
MMENUN#*238
2
MbN: Select the desired setting. a
MSAVEN
R If you select "Off", press MOFFN to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
*: Select "AM" or "PM". a MOKN
5
Enter the desired hour and minute you
wish to end this feature.
6
*: Select "AM" or "PM".
7
MSAVEN a MOFFN
Changing the start and end time
1
For handset: MMENUN#237
For base unit (using a handset):
MMENUN#*237
2
Continue from step 3, "Turning night
mode on/off", page 46.
Selecting groups to bypass night
mode
1
For handset: MMENUN#241
For base unit (using a handset):
MMENUN#*241
2
MbN: Select the desired groups. a
MSELECTN
R " " is displayed next to the selected
group numbers.
R To cancel the selected group:
MbN: Select the group. a Press
MSELECTN again. "
3
MSAVEN a MOFFN
" disappears.