Table of Contents
Advertisement
Alarm
An alarm sounds at the set time for 1 minute and
is repeated 5 times at 5 minute intervals (snooze
function). A text memo can also be displayed for
the alarm. A total of 3 separate alarm times can be
programmed for each handset. You can set one of
3 different alarm options (once, daily, or weekly)
for each alarm time.
Important:
R Make sure the unit's date and time setting is
correct (page 15).
Handset
1
MMENUN#720
2
MbN: Select the desired alarm. a MSELECTN
3
MbN: Select the desired alarm option. a
MSELECTN
"Off"
Turns alarm off. Go to step 10.
"Once"
An alarm sounds once at the
set time.
"Daily"
An alarm sounds daily at the set
time. Go to step 5.
"Weekly"
Alarm sounds weekly at the set
time(s).
4
Proceed with the operation according to your
selection in step 3.
n Once:
Enter the desired month and date. a MOKN
n Weekly:
MbN: Select the desired day of the week and
press MSELECTN. a MOKN
5
Set the desired time.
6
*: Select "AM" or "PM". a MOKN
7
Enter a text memo (10 characters max.). a
MOKN
8
MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different ringer
tone from the one used for outside calls.
9
MbN: Select the desired snooze setting. a
MSAVEN
10
MSELECTN a MOFFN
For assistance, visit www.panasonic.ca/english/support
TG153CSK(en)_0422_ver021.pdf
45
Note:
R Press MSTOPN to stop the alarm completely.
R When the handset is in use, the alarm will not
sound until the handset is in standby mode.
R Press any dial key or MSNOOZEN to stop the
sound but keep the snooze function activated.
R If you want to make an outside call when the
snooze function is activated, please stop the
snooze function before making the call.
Night mode
Night mode allows you to select a period of time
during which the handset and/or base unit will not
ring for outside calls. This feature is useful for time
periods when you do not want to be disturbed, for
example, while sleeping. Night mode can be set
for each unit.
Using the phonebook's group feature (page 32),
you can also select groups of callers whose calls
override night mode and ring the unit (Caller ID
subscribers only).
Important:
R Make sure the unit's date and time setting is
correct (page 15).
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
Handset
1
MMENUN#238
2
MbN: Select the desired setting. a MSAVEN
R If you select "Off", press MOFFN to exit.
3
Enter the desired hour and minute you wish to
start this feature.
4
*: Select "AM" or "PM". a MOKN
5
Enter the desired hour and minute you wish to
end this feature.
6
*: Select "AM" or "PM".
7
MSAVEN a MOFFN
Base unit
1
MMENUN#238
2
MbN: Select the desired setting. a MSAVEN
R If you select "Off", press MEXITN to exit.
3
Enter the desired hour and minute you wish to
start this feature.
2016/04/22
Programming
45
14:54:43
Advertisement
Table of Contents
