Table of Contents
Advertisement
254
6) Place the bottom left front edge of Log 251
against the left edge of the burner tray and
rest the log on the cutout on Log 253.
250
251
7) Position Log 252 across the cutouts in Logs
254 and 253. The notch in the bottom right
end fitting against the 5th grate tab.
254
5th Grate Tab
251
254
8) Pull off ember size pieces of rock wool and
gently place them on the front of the burner
tray in the places shown in the photo below.
Do not compress the rock wool, leave it loose.
250
Separate platinum embers and place them
on the front of the burner on and around the
rock wool.
9) Test fire to ensure proper light off (make
sure flame flows smoothly from one end of
burner to the other). If there is any flame
254
hesitation, check that area for any blockage
of the burner ports.
Cutout
250
Place rock wool in these 2 locations
on the burner tray.
installation
P33CE-11 Direct Vent Gas Fireplace
|
47
Advertisement
Table of Contents
