Predefined Schedules: Dhw Tank Temperature; Weather Dependent Operation; To Set The Weather Dependent Settings - Daikin Intergas Altherma Hybrid User Reference Manual

4.7.5 Predefined schedules: DHW tank temperature

4.8 Weather dependent operation

4.8.1 To set the weather dependent settings

EJHA04AAV3 + NHY2KOMB28+32AA
Daikin Altherma Hybrid hydrosplit heat pump
4P556862-1A – 2020.10
a
: Start production of domestic hot water. Desired DHW tank temperature =
Preset value (Storage comfort)
b
: Start production of domestic hot water. Desired DHW tank temperature =
Preset value (Storage eco)
Predefined 1
a
Mon - Sun
b
Predefined 2
a
Mon - Sun
b
Predefined 3
a
Mon - Fri
b
a
Sat - Sun
b
In space heating control, the leaving water temperature setpoint mode can be:
▪ Fixed
▪ Weather-dependent (the leaving water temperature is determined automatically
depending on the outdoor temperature)
To select the setpoint mode, see the installer reference guide.
To set the parameters for the weather-dependent curve, see below.
Prerequisite: You switched the permission level to Advanced end user.
1 Go to [7.7]: > User settings > Set weather dependent.
2 For main leaving water temperature zone [7.7.1], modify with
and confirm with
Set weather-dependent heating
T t
c
d
a
T Target leaving water temperature
t
:00
:00
.
b
T a
4 Operation
|
:00
:00
:00
:00
,
User reference guide
, , ,
41