Table of Contents
Advertisement
4.4.6 Room thermostat control - Using the leaving water temperature home pages
Typical leaving water temperature home pages
EJHA04AAV3 + NHY2KOMB28+32AA
Daikin Altherma Hybrid hydrosplit heat pump
4P556862-1A – 2020.10
Usage example: You have a party
If you are in the following situation:
▪
You are using the following room temperature schedule:
-
17:00 preset value (Comfort) = 20°C
-
23:00 preset value (Eco) = 18°C
▪
Tonight you have a party and you want to use the preset value (Comfort) until
02:00.
Then you can do the following:
1 Set the overrule period (Temperature lock) to 6 hours.
2 At 20:00, go to the room temperature home page (Room).
3 Press
to select .
Result: The preset value (Comfort) will be used until 02:00. After that, the
schedule will be used again.
Usage example: You go away for a couple of hours
If you are in the following situation:
▪
You are using the following room temperature schedule:
-
08:00 preset value (Comfort) = 20°C
-
23:00 preset value (Eco) = 18°C
▪
At 14:00, you go away for 3 hours.
Then you can do the following:
1 Set the overrule period (Temperature lock) to 2 hours.
2 Go to the room temperature home page (Room).
3 Press
to select .
Result: For the next 2 hours, the room will NOT be heated to the scheduled 20°C,
but to the preset value (Eco = 18°C). After 2 hours, the room will heat up again to
the scheduled 20°C.
Advantage:
You save energy because you do NOT heat the room unnecessary, and by the time
you come home the room is warm again.
INFORMATION
The leaving water is the water that is sent to the heat emitters. The desired leaving
water temperature is set by your installer in accordance with the heat emitter type.
Example: Underfloor heating is designed for lower leaving water temperature than
radiators and heat pump convectors and/or fan coil units. You only have to adjust
leaving water temperature settings in case of problems.
Main zone:
4
Operation
|
User reference guide
21
Advertisement
Table of Contents
